Stihl MS200T Muffler and Carb

[slidegod]

I will be getting a MS 200T to replace my old 020T and was wondering if there is a easy muffler mod for it and if it will come with a ajustable or fixed carb (read that the fixed carb is terrable)? Any help appreciated!

 

[sedanman]

The MS200 is a very tight package, the muffler is aluminum and fairly well tucked in. Builders here have reported good gains when "opened up". Not sure on the carb. Your 020T might bring enough on E-Bay to pay to have the MS200 "power ported".

 

[Jacob J.]

The MS200T comes with a fixed hi speed jet and a partially adjustable low speed screw, that has the cap. The motor is designed very well, and you can retro-fit the saw with the fully adjustable carburetor after having done your other work to it.

 

[SilverBlue]

The muffler has baffles and it’s best sent to one of the saw gurus for modification if you are not sure you can do it, you can also bet that the bolts will need to be drilled out and retapped due to locktite.

 

[Jacob J.]

Or he could just make a replacement tuned muffler out of a Budweiser can and pipe clamps.

 

[SilverBlue]

LOL

 

[glens]

Actually, Jacob, the saw really responds well when you use <a href="http://www.bitburger.com/produkte/premium9.html">Bitburger</a>, or in a pinch, <a href="http://www.warsteiner.com">Warsteiner</a> ("Because life is too short to drink cheap beer.") cans.&nbsp; Both web sites are very crappily designed, but the saw isn't, and it doesn't much care for American beer, especially if it ain't a pilsner.

Glen