Gypo Logger
Timber Baron
Here's a brandnew, never used Stihl Red Lightning cylinder. It's the same cc as the 090 cyl.
300$ U.S.
300$ U.S.
Stihl Red Lightning Cylinder
- Thread starter Gypo Logger
- Start date
Help Support Arborist Forum:
Gypo Logger
Timber Baron
Try to find one used let alone brandnew.
John
John
John,
I thought the Contra/Lighting was 106cc and shared the same cylinder as the the 070/090G. Am I wrong ? (I am wrong often)
Bill
I thought the Contra/Lighting was 106cc and shared the same cylinder as the the 070/090G. Am I wrong ? (I am wrong often)
Bill
ehp
Addicted to ArboristSite
if it is 58 mm bore then it is a contra but if it is a 66 mm bore then it is a super , rare and hard to find but I have 3 supers
Gypo Logger
Timber Baron
Hi Ed, the cylinder is 66 mm and new in box. Let me know if you're interested and I can put your name on it.
John
John
Hard to find but not impossible. Here is another 66mm with piston, brand new. Since we are friends John you can have this for $200 and then you will be able to make $100. Mike
Marky Mark
Hell's Kitchen Trapper
Mike generally friends give friends things because they want to not for profit. Send it to Gypo he might send you some of his 1/2" chain he sitting on.
Feather your nest I always say.
Feather your nest I always say.
No profit Mark. I paid $225 for it and was doing a friend a favor. Isn't that feathering a nest? Mike
Busy Beaver
ArboristSite Lurker
Sly Dog!
You have to think sometimes before you speak with forked tongue, Rupedoggy? Don't you realize you just screwed Gypo Loggers cylinder sale, or was that your plan? BB
You have to think sometimes before you speak with forked tongue, Rupedoggy? Don't you realize you just screwed Gypo Loggers cylinder sale, or was that your plan? BB
MacDaddy
Addicted to ArboristSite
I would still buy Johns because he is a friend!Looks like you screwed yourself out of 100 dollars because you could of listed yours for 300.00
Gypo Logger
Timber Baron
What we have here now are 2 jugs and a piston for 500$. Stihl not a bad deal.
John
John
ehp
Addicted to ArboristSite
If we still had the 1960 and older races ,I would pay $300 in a heart beat cause that is the saw to have period, i know some guys that might want that jug ok,
And to Rupedoggy, that was pretty low sh!tting on someone else thread
And to Rupedoggy, that was pretty low sh!tting on someone else thread
xander9727
The Silverback
Rupe,
NOT COOL
!
EHP,
Don't let old Lamebert fool ya, he still has 3 NIB 090 supers that he is saving for the day "they'll bring $3K U.S."
Last time I was in Ballsinyaface, Ontario John had one brand new 100' roll of 1/2" full chisel chain and another 100' roll that was about 2/3 full.
He supposedly had a friend in Alaska that knew an old saw shop that had a couple thousand feet of the stuff.
Gimpo always knows where the good deals are........he just won't always tell ya.
Did I mention he sent me a saw with a 3/8 pitch chain and bar but a .325 sprocket.
But I guess that's the way he laughs at me.
NOT COOL
!EHP,
Don't let old Lamebert fool ya, he still has 3 NIB 090 supers that he is saving for the day "they'll bring $3K U.S."
Last time I was in Ballsinyaface, Ontario John had one brand new 100' roll of 1/2" full chisel chain and another 100' roll that was about 2/3 full.
He supposedly had a friend in Alaska that knew an old saw shop that had a couple thousand feet of the stuff.
Gimpo always knows where the good deals are........he just won't always tell ya.
Did I mention he sent me a saw with a 3/8 pitch chain and bar but a .325 sprocket.
But I guess that's the way he laughs at me.
Gypo Logger
Timber Baron
Mike is offering his jug and piston at a very competative price, but because I refuse to be undersold, I am throwing in 2 new K2PM jugs and pistons at no extra cost. Wrist pins, circlips and rings are extra though, but I will include a 325. 9 pin sprocket, just for $hits and giggles.
John
John
ehp
Addicted to ArboristSite
My last Super, I paid $500 usa for it, it cut a 28.3 seconds in 12 inch round 3 cuts, To be honest he told me it was a super but it cut pretty slow so I took a chance and bought it, he had skip tooth chain on it and had it so lean cause the governor was coming on and that choked the motor, fixed the governor , set carb put a normal chain on it and it cut in the low 12,s with .404 chain solid bar.
last show I ran it at we were allowed 3/8's chain, so I put a 11 pin gear on it , the wood was 9 by 9 aspen saw on ground running, your hands on the wood, time starts when your hands move, 3 cuts , 8.03 seconds, so if any of you guys have the 106cc saw , buy the bigger jug and piston bolt it on, you will see a huge power increase
last show I ran it at we were allowed 3/8's chain, so I put a 11 pin gear on it , the wood was 9 by 9 aspen saw on ground running, your hands on the wood, time starts when your hands move, 3 cuts , 8.03 seconds, so if any of you guys have the 106cc saw , buy the bigger jug and piston bolt it on, you will see a huge power increase
crash/banger
ArboristSite Operative
Gypo, I would pay no mind to Rupe he is a mooseknuckle licker anyway and there is nothing you can do for people like that...........giggle,giggle If I needed the part I would rather pay you 600$ than give Rupe 200$ as far as the majority goes his reputation is pretty questionable anyway.......you might send him out 200$ and get back a piston and cylnder for a cub cadet weedeater...........and why wouldn't he???
Wait a minute guys. I have had this cylinder and piston for over four years. If I wanted to sell it I would have long ago. If I would have wanted to undercut John I would have posted another thread with the items listed cheaper. I was offering them to him for less than I paid. I even got a telephone call from someone to buy them and told him that he would have to contact Lambert. If you guys are offended by what you wrongly preceived, why weren't you jumping on another member when he posted on a same thread that he would sell his 346 Husky cheaper than the guy who was advertising one? If you will check the "equipment for sale" you will see that I have nothing for sale at this time. I started corresponding with John about four years ago and met him about three years ago. He stayed at my house about two years ago. Can one of you guys that are criticizing me say you have known him longer? John and I go back to the days when he was kicked out of Disneyland. Mike
MacDaddy
Addicted to ArboristSite
just by puting out the message that you would sell the same thing for less is what everybody is madd at you for but I gues it is your way of looking out for friends P.S feathering a nest meant somebody elses not yours
lucky
ArboristSite Guru
You bunch of silly panzies quit your petty b!tching! Y'all are like a bunch of chickens picking on one guy only because he's not part of your precious "in crowd". Amongst yourselves you laugh and joke and play stupid tricks on each other and it's no big deal. Mike offered his wares to Lamebert so whats the big deal? Who friggin cares? If any you clowns had done the same you'd all be laughing about it. Hypocrites!
MacDaddy
Addicted to ArboristSite
Hey Im not b!tchen about your friggin language (LOL)
