Stump grinding - Tilt trailer or enclosed trailer?

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

AAASTUMPSERVICE

ArboristSite Operative
Joined
Jan 26, 2011
Messages
111
Reaction score
12
Location
Snohomish County, WA
I currently use a tilt trailer for my stump grinding business. I am considering buying a enclosed trailer to haul my equipment.

I have a Carlton TRX 7015 and Alpine Magnum to haul around.

Tilt trailer pros
Fast load/unloading
Hd trailer

Tilt trailer cons
1. In the weather
2. Unsecure from theft if left outside
3. Can't store everything I need to take with me.

Enclosed trailer pros
1. Out of the weather
2. Somewhat moreSecure from theft
2. Store all saws, oil, gas, tools, spare parts, ect.
3. Organized hook up trailer and go. No loading up before jobs.

Enclosed trailer cons
1. Not sure if it can hold the weight, mainly the ramp door. Was thinking the barn door might be an option and use hd ramps.

I currently tow my grinder with a 2013 f350 lariat crew cab long bed. I don't want to put anything in the truck I'm a clean freak. I want everything in the trailer.

Does anyone use a enclosed trailer for their stump grinding biz? Opinions wanted, Thanks guys!
 
grinder trlr in use.jpg grindertrlrrear.jpg I started with a tilt trailer, but changed over to an enclosed trailer a few years ago. At the time, I had a 7015TRX, and like you, I was worried about those ramp/rear doors. Also, a lot of enclosed trailers are built with aluminum, and not all that sturdy. Here is what I did:
1. Bought a trailer that is all welded steel, no aluminum.
2. Trailer has swing-out barn doors
3. Had a set of ramps built out of heavy aluminum channel. They fit crossways inside the trailer. I just lift them out and drop the pin on each one into a matching hole in the rear trailer frame crossmember.
4. I had an extra floor brace,(angle iron), welded into place between each factory cross brace. The 7015 is heavy.
5. Had rear floor crossmember boxed in to reinforce it for handling weight of machine as it comes up ramps.
6. Had an outrigger/jack installed at each back corner of trailer. This helps keep trailer from tipping way down when heavy machine is being loaded.
I could find no trailer manufacturer that built the heavy duty trailer like I wanted. So, I had a friend of mine at a local welding shop make all the modifications. I spent about an extra $1000 rigging out the trailer like I wanted it. I now can haul all my tools, fuel, and supplies with me in the locked trailer. Also, when I go out, I just hook up and go. no loading time wasted.
Jeff




I currently use a tilt trailer for my stump grinding business. I am considering buying a enclosed trailer to haul my equipment.

I have a Carlton TRX 7015 and Alpine Magnum to haul around.

Tilt trailer pros
Fast load/unloading
Hd trailer

Tilt trailer cons
1. In the weather
2. Unsecure from theft if left outside
3. Can't store everything I need to take with me.

Enclosed trailer pros
1. Out of the weather
2. Somewhat moreSecure from theft
2. Store all saws, oil, gas, tools, spare parts, ect.
3. Organized hook up trailer and go. No loading up before jobs.

Enclosed trailer cons
1. Not sure if it can hold the weight, mainly the ramp door. Was thinking the barn door might be an option and use hd ramps.

I currently tow my grinder with a 2013 f350 lariat crew cab long bed. I don't want to put anything in the truck I'm a clean freak. I want everything in the trailer.

Does anyone use a enclosed trailer for their stump grinding biz? Opinions wanted, Thanks guys!
 
Very cool, I'm jealous!!! Ya I think I have made
My mind. I am going to look at enclosed trailers Friday and I found a company that builds HD trailers with HD ramp doors. Should be a exciting but expensive purchase.
 
I considered it in the past but haven't yet. Other con is having to fuel from gas cans every time it would seem, unless your gas stations have long hoses.

Stumper63
 
I considered it in the past but haven't yet. Other con is having to fuel from gas cans every time it would seem, unless your gas stations have long hoses.

Stumper63
I can fuel my grinder right in the trailer. My fuel supplier has long hoses, so I just open the side door on the trailer and drag the hose in.
Jeff
 
You can open the side door to fuel. You can also get the blitz brand 15 gal gravity feed gas tanks. I mounted 2 on the wall at my back door to fuel my mowers. I only have to stop once a week for gas.

Sent from my SCH-I605 using Tapatalk
 
I've had the same thought about open VS enclosed trailer for my stump business..
I usually do clean ups about 50% of the time though and have to lay a tarp at the end of my open trailer to make it easier to unload and pull off debris.

Do you do clean ups or just grind ??
 
I ended up getting a custom enclosed trailer made to accommodate both my Vermeer 352 and 852 side by side.

With the man doors, I am able to fuel both machines with a standard pump 6 ft hose, but I find that I always go to the same fill station.

As for clean up, grindings stay on site or I fill a Waste Management "Bagster" with the grindings and have them come and pick it up within 48 hours (one price up to 3,000 lbs).
 

Attachments

  • Trailer.jpg
    Trailer.jpg
    57.7 KB
  • Trailer inside.jpg
    Trailer inside.jpg
    4 KB
A word of caution about loading trailers. If using a smaller truck be sure to block the front wheels if loading on a downhill. Years ago I was loading a small track loader on a trailer and the weight lifted the rear end of the truck off the ground. The whole rig started rolling down the hill until I hit the reverser. Blocking the rear of the trailer as Mowingman suggests will help prevent that.
 

Latest posts

Back
Top