Sure is quiet in here....do I need to start a fight?

[tbone75]

Just started raining. Glad I got all that stuff done yesterday !

Just not sure I will ever get moving today ! :msp_razz:

 

[AU_K2500]

Well its official ....swearing off huaqvarnas for good.

 

[roncoinc]

Adam,,,,,you want the phone number of the guy i call ??

 

[farrell]

Adam,,,,,you want the phone number of the guy i call ??

I need 5lbs of HE!

I think that will fix the problem!

My uncle said he would look at

Must be the valves?

Or air leak?

 

[tbone75]

Well its official ....swearing off huaqvarnas for good.

480 is stihl muffed up ?

 

[tbone75]

This will look real good on my 5000 Plus !

 

[tbone75]

Took most of the day and a few pills , but I am ready to tear into that bathroom !

 

[tbone75]

Adam,,,,,you want the phone number of the guy i call ??

Bout time you checked in,danged Ol Smurf !

Hows the arm ?

 

[tbone75]

Surprise box of stuff ! Jugs are all good , but one has several fins broke off. Don't know what they fit yet ? LOL

 

[AU_K2500]

480 is stihl muffed up ?

I have a Stihl that is 10-15 years older and I can still buy parts at a dealer IN STOCK!!!!! nothing is available for this POS. Tank vent, NLA. Oil pump seals, NLA. av bushings NLA.

Finally got it running strong, but now I cant make it stop piddeling on the floor cause the seals are NLA. It dribbles fuel when I crank or turn the saw on its side cause the vent is NLA. Oh well, its still a strong saw.

 

[tbone75]

I have a Stihl that is 10-15 years older and I can still buy parts at a dealer IN STOCK!!!!! nothing is available for this POS. Tank vent, NLA. Oil pump seals, NLA. av bushings NLA.

Finally got it running strong, but now I cant make it stop piddeling on the floor cause the seals are NLA. It dribbles fuel when I crank or turn the saw on its side cause the vent is NLA. Oh well, its still a strong saw.

Should be some way to fix that ? Start a thread and ask about it ! Bet someone here knows !

 

[tbone75]

I got maters ! :msp_smile:



































































































Yes,I cheated. LOL

 

[dancan]

Cheater !!!!!!
Hmm , since it's raining , I'll go start the "Swede" saw and scrounge a few "Leaners" ......

 

[AU_K2500]

Should be some way to fix that ? Start a thread and ask about it ! Bet someone here knows !

im sure it is fixable. in fact, its probably something i did incorrectly while putting it back together after replacing the seals. Its a good clean saw, that i got a very fair deal on. It has new seals, new fuel line, carb kit, and 200+ comp. I will most likely just run a screw in the vent hose, and try to sort out the oil leak the best i can. After that it will be a matter of finding a bar thats a little better fit. this 20" hardnose wont last long.

 

[tbone75]

What a mess !! :msp_scared:

 

[pioneerguy600]

What a mess !! :msp_scared:

I have seen much worse, a few sticks underneath and a small piece of plywood and you are good to go.

 

[pioneerguy600]

This will look real good on my 5000 Plus !

Is that a 16" bar,.I got one just like it from Bryce.

 

[dancan]

What a mess !! :msp_scared:

See what all that Spam and Dew gets ya !

 

[tbone75]

Is that a 16" bar,.I got one just like it from Bryce.

18" someone on flea bay. 32.00 to here.

 

[tbone75]

Cut the rot out,now square it up and build it in.