Sure is quiet in here....do I need to start a fight?

[roncoinc]

Now onto the huskapoo 235..
had to order the carb kit for it from BC ..
took awhile to get here.
least the saw has the correct color scheme

 

[IEL]

Oh sure now you tell me :msp_angry:

Good info for future!

The good half face cartridge masks filter out all smells. (at least I have always found them to) When my puppy was really little, he left a brown mess in his cage. The smell was so bad I couldn't enter the room. Put on the 3m, and couldn't smell a thing.

 

[roncoinc]

The good half face cartridge masks filter out all smells. (at least I have always found them to) When my puppy was really little, he left a brown mess in his cage. The smell was so bad I couldn't enter the room. Put on the 3m, and couldn't smell a thing.

That be good for working on steals !!!!!!!!!!!!! .

 

[roncoinc]

FEEPAY !!!!!!!!!!!!

carb for the ms180c,,,$35 delivered......

Amazon,, $21 delivered

 

[Jimmy in NC]

What would a vacation be with out ordering some saw parts? Just had to order parts for a customer saw sitting at the house I was supposed to order Monday! Hope they make it by Saturday.....


The saw I am working on is a cut off saw I rebuilt a few months ago. Guy called saying no compression and evidence of dust in the intake...I feared the worst. This was a no name kit from Randy Watson (watsonr). I pulled it down and the jug and slug look great. Ring shows good end gap too. The bottom of the crankcase was full of gas..maybe an inch deep. I had pulled the plug when I picked it up and turned it over while pulling to clear it. Could it have been totally flooded and that's why it couldn't draw air and make compression? Shouldn't upside down with out plug while pulling it clear this? I ordered a new Caber ring and am going through the carb as a precaution. Any other ideas?



Jimmy

 

[Jimmy in NC]

Just got that mower I traded for wood out of here ! Only have 2 left ! New one and my old White,that won't turn over ? Not sure if its the starter or wiring ? 22hp Kohler I put on it. Even have a spare motor. LOL I like a Briggs way better ! The old one lung Kohlers were some good motors,the newer ones suck. That 20hp Magnum is the worst !

Agreed. K series were solid..new are like 1200 hr motors.




Jimmy

 

[dancan]

FEEPAY !!!!!!!!!!!!

carb for the ms180c,,,$35 delivered......

Amazon,, $21 delivered

Some of the sellers on the bay know they can get the goods on Amazon , some just cut , paste and list .
If someone buys they inturn buy from Amazon but have it drop shipped to the buyer from the original Amazon seller , easy profit , no inventory .
Fish used to sell 180 stuff , not sure if he's still a sponsor .

 

[Jimmy in NC]

FEEPAY !!!!!!!!!!!!

carb for the ms180c,,,$35 delivered......

Amazon,, $21 delivered

Good score! Pays to shop around most of the time.




Jimmy

 

[roncoinc]

What would a vacation be with out ordering some saw parts? Just had to order parts for a customer saw sitting at the house I was supposed to order Monday! Hope they make it by Saturday.....


The saw I am working on is a cut off saw I rebuilt a few months ago. Guy called saying no compression and evidence of dust in the intake...I feared the worst. This was a no name kit from Randy Watson (watsonr). I pulled it down and the jug and slug look great. Ring shows good end gap too. The bottom of the crankcase was full of gas..maybe an inch deep. I had pulled the plug when I picked it up and turned it over while pulling to clear it. Could it have been totally flooded and that's why it couldn't draw air and make compression? Shouldn't upside down with out plug while pulling it clear this? I ordered a new Caber ring and am going through the carb as a precaution. Any other ideas?



Jimmy

WHAT ??????

your confusing here..
if the ring has good end gap WHY replace it ??
if the crank is full it's like having crank stuffers in there,,should have HI comp ..
did you test the comp ??

you arent going to clear the fuel out if there is some in the tank being pulled in no matter what position you hold the saw in..
well,,,if the pickup is out of the fuel then maybe ,,BUT,,,empty tank,clear fuel,test comp.

As to where you sourced the parts,,,well,,i would rather buy off some guy on a street corner with an overcoat holding it open saying " ppsstt hey fella.,,wanna buy a top end kit ? "..

 

[AU_K2500]

WHAT ??????

your confusing here..
if the ring has good end gap WHY replace it ??
if the crank is full it's like having crank stuffers in there,,should have HI comp ..
did you test the comp ??

you arent going to clear the fuel out if there is some in the tank being pulled in no matter what position you hold the saw in..
well,,,if the pickup is out of the fuel then maybe ,,BUT,,,empty tank,clear fuel,test comp.

As to where you sourced the parts,,,well,,i would rather buy off some guy on a street corner with an overcoat holding it open saying " ppsstt hey fella.,,wanna buy a top end kit ? "..

You sound pretty familiar with men on street corners there Ron.....personally, I try to avoid people on street corners.

 

[roncoinc]

You sound pretty familiar with men on street corners there Ron.....personally, I try to avoid people on street corners.

WHAT !! ???

you dont like good deals on rolex watches and top end kit's ??

 

[Fish]

WHAT !! ???

you dont like good deals on rolex watches and top end kit's ??

Damn, how many posts have you made on this mindless thread? You going after Lakeside?

 

[roncoinc]

Damn, how many posts have you made on this mindless thread? You going after Lakeside?

Nope,,we are going after the MONARCH !!!!!!

the Kingfish !!!

Tho we may not consume the necessary amounts of mind altering substances to to be able to keep up we still give a good effort !!
you of course are invited to contribute whatever dribble and droppings you feel may fit in

 

[Jimmy in NC]

WHAT ??????

your confusing here..
if the ring has good end gap WHY replace it ??
if the crank is full it's like having crank stuffers in there,,should have HI comp ..
did you test the comp ??

you arent going to clear the fuel out if there is some in the tank being pulled in no matter what position you hold the saw in..
well,,,if the pickup is out of the fuel then maybe ,,BUT,,,empty tank,clear fuel,test comp.

As to where you sourced the parts,,,well,,i would rather buy off some guy on a street corner with an overcoat holding it open saying " ppsstt hey fella.,,wanna buy a top end kit ? "..

Well the ring is questionable and for $5.00 I'd rather put a Caber in it just to know. There was no compression to measure with a test. Will see how it does when it goes back together.

As for the vendor...he's a site sponsor.




Jimmy

 

[Fish]

Nope,,we are going after the MONARCH !!!!!!

the Kingfish !!!

Tho we may not consume the necessary amounts of mind altering substances to to be able to keep up we still give a good effort !!
you of course are invited to contribute whatever dribble and droppings you feel may fit in

Well alright then!!!!

I know that I dribble a lot more than you guys!!!!!!

 

[Jon1212]

Well alright then!!!!

I know that I dribble a lot more than you guys!!!!!!

Don't sell yourself short. You have provided my sig line with some serious bolstering. So, thanks.

 

[tbone75]

Ron I got one of them china carbs for a 180 for 14.00 ! LOL This is the second one I have got from them,first one is stihl working great ! Fully adjustable too !

 

[dancan]

Daum ! A mere mention of the Instigator and he appears LOL
Hey Fish , you get a new service manager to replace the last one , wasn't Flavio or sumthin like that his name ?

 

[dancan]

I got a call from a poolawn owning "Carpenter" type guy today , he was trying to fix a howling noise in the rear of his caravan .
He wanted to know how to get the rubber back over the plunger :confused2:

 

[tbone75]

Getting ready to glue that sink in.Went to Blowes again for more stuff. Bought more plants ? LOL Seen the had purple mater plants,had to have one ! LOL Seen a pot full of cuke plants,had to have that too ! 24 plants in that one pot ! LOL Already had 12 bush cuke plants ! They didn't do much last year,so I should have some this year ! Need more bread & butter pickles !

My Slug arse is dragging so bad right now,just aint funny ! Been way over doing it the last few days.

Strawberries are getting ripe ! Been on coon and possum watch too. 2 coons and one possum last night.