Sure is quiet in here....do I need to start a fight?

[tbone75]

TAINT funny fella !! :msp_angry:

All ya gots to do is get in there and fart , instant hot tub !

 

[tbone75]

TAINT funny fella !! :msp_angry:

:msp_flapper:

 

[Jimmy in NC]

Li'l squeeeel goneeeeeeeeeeeeee !!!!

guy comr to pick it up,started 4th pull,away it went

That's a good day right there!

DANG !!!!!!!!!!!!!!!!!

went to take a dip in the pool and the OL had turned on the filter/pump and left the solar heater going

90 deg pool water !!!

gonna backwash the filter,,that will get rid of some water and then run the hose into it,,that will put some COLD water in,,mebe help out a bit

That's sad right there... I'd say it ALMOST off sets the positive of a Squeal leaving... not quite though! Good day for the Squeal leaving!

 

[Jimmy in NC]

Haha!

Sorry didn't mean to part block ya!

It's all good.. I need boxes going out. The wife will think I've turned over a new leaf and let down her guard!

Yep all the stratos are the same coil.

No problem then. The coils normally make it ok when the saw is bitten up by the 4 - in - 1 bucket. It's the crank that takes the beating.....

We gonna start a box war ? LOL I am sure I have way more junk than you ! LOL Soon as I can get things sorted and moved ?

Sparky can't help you ! He may be in the dog house now !

I think Sparky has some of it hidden... but what was that saying about sinking ships and lips...

 

[Jimmy in NC]

I come in out of the heat and all you slackers takin' naps today?!

opcorn:

 

[tbone75]

Done with whacker hell fer the day ! The Steel only has 100 compression ? May need lots of help ?
My Eeko is all back together , try it tomorrow.

Its even HOT in my basement !

 

[tbone75]

Wonder if I can find a piston or P&C for a FS76 Steel whacker ?

 

[AU_K2500]

made it to Asheville. Bout to go drink some Bur.

 

[dancan]

John , you need me to put up a pic of a pull cord ? Might help you get goin ???

 

[tbone75]

John , you need me to put up a pic of a pull cord ? Might help you get goin ???

:msp_thumbsup:

 

[Cantdog]

made it to Asheville. Bout to go drink some Bur.

Damn good day fer Bur drinkin......starting in muhself right now....mid 90's here today lots of crane work...cleaning up...packing up equipment.....come home to get the Kazawaki out for the newest, papered MC rider....put the electrolyte in the new battery and set that to trickle charge.....looking things over.......unlock the gas cap and take a look-see inside.....EEEEEEK!!!!! Much rust on every surface........^&%k!!!!! Just got back from the shop gathering tools....gotta pull the tank and flush/clean/shake/w/rocks etc. that gas tank.....looks to be all surface rust...no leakage...but a lot of it!! Way to much to just run...plug up fuel filters instantly!! After I saw that chit I ran to the Ducatis and checked them...those were fine.....I think they have been idle since before E10 arrived here.......the Kazawaki has been run since I'm sure....by the looks....no one else to blame but me.....but that stihl don't make me happy.....time for another tall green can and some serious wrenchin'....did I ever mention .....that...... I'm not very partial to "Asian" bikes...much.....like at all....kinda like Stihls to me.....

 

[dancan]

Kawasaki on the rocks , shaken , not stirred LOL
Put an inline fuel filter ???

 

[tbone75]

Damn good day fer Bur drinkin......starting in muhself right now....mid 90's here today lots of crane work...cleaning up...packing up equipment.....come home to get the Kazawaki out for the newest, papered MC rider....put the electrolyte in the new battery and set that to trickle charge.....looking things over.......unlock the gas cap and take a look-see inside.....EEEEEEK!!!!! Much rust on every surface........^&%k!!!!! Just got back from the shop gathering tools....gotta pull the tank and flush/clean/shake/w/rocks etc. that gas tank.....looks to be all surface rust...no leakage...but a lot of it!! Way to much to just run...plug up fuel filters instantly!! After I saw that chit I ran to the Ducatis and checked them...those were fine.....I think they have been idle since before E10 arrived here.......the Kazawaki has been run since I'm sure....by the looks....no one else to blame but me.....but that stihl don't make me happy.....time for another tall green can and some serious wrenchin'....did I ever mention .....that...... I'm not very partial to "Asian" bikes...much.....like at all....kinda like Stihls to me.....

That rust is hard to get all out inside a tank ! :msp_scared:

Good luck !

 

[tbone75]

Kawasaki on the rocks , shaken , not stirred LOL
Put an inline fuel filter ???

Could help ?

 

[tbone75]

Get it cleaned out , then have it powder coated inside. Scoot says it works great.

Haven't tried my stuff out yet ? Dang SLUG ! :msp_unsure:

 

[Jimmy in NC]

Done with whacker hell fer the day ! The Steel only has 100 compression ? May need lots of help ?
My Eeko is all back together , try it tomorrow.

Its even HOT in my basement !

I've got two SRM-2100 that I really love. Picked them both up for a total of $40 between the two. I don't think anyone makes a better trimmer in my opinion. Brush cutters are a different story.. but a straight trimmer they are top notch.

Damn good day fer Bur drinkin......starting in muhself right now....mid 90's here today lots of crane work...cleaning up...packing up equipment.....come home to get the Kazawaki out for the newest, papered MC rider....put the electrolyte in the new battery and set that to trickle charge.....looking things over.......unlock the gas cap and take a look-see inside.....EEEEEEK!!!!! Much rust on every surface........^&%k!!!!! Just got back from the shop gathering tools....gotta pull the tank and flush/clean/shake/w/rocks etc. that gas tank.....looks to be all surface rust...no leakage...but a lot of it!! Way to much to just run...plug up fuel filters instantly!! After I saw that chit I ran to the Ducatis and checked them...those were fine.....I think they have been idle since before E10 arrived here.......the Kazawaki has been run since I'm sure....by the looks....no one else to blame but me.....but that stihl don't make me happy.....time for another tall green can and some serious wrenchin'....did I ever mention .....that...... I'm not very partial to "Asian" bikes...much.....like at all....kinda like Stihls to me.....

Don't forget about the 3 part gas tank liner kits. I think they are Kreem brand?! Anyways they do wonders for dirty tanks. They have a cleaner, etch, then sealer. Cheap insurance if ANY doubt about the tank and the only option on some Asian bikes with remote nooks and crannies as the tanks are integral to the body work. Just my $.02

 

[Jimmy in NC]

Off to mow some grass or find a hay baler. Either way it's getting tall... :msp_angry:

 

[Stihl 041S]

I've got two SRM-2100 that I really love. Picked them both up for a total of $40 between the two. I don't think anyone makes a better trimmer in my opinion. Brush cutters are a different story.. but a straight trimmer they are top notch.



Don't forget about the 3 part gas tank liner kits. I think they are Kreem brand?! Anyways they do wonders for dirty tanks. They have a cleaner, etch, then sealer. Cheap insurance if ANY doubt about the tank and the only option on some Asian bikes with remote nooks and crannies as the tanks are integral to the body work. Just my $.02

Pro Tech was an aircraft product we used in the 70s for sealing in bad things.

Rattle with gravel. The slosh the stuff around. Thicker than milk but not much.

All fittings off first. My $.01 1/2

 

[tbone75]

Pro Tech was an aircraft product we used in the 70s for sealing in bad things.

Rattle with gravel. The slosh the stuff around. Thicker than milk but not much.

All fittings off first. My $.01 1/2

Hey Uncle Mongo !!


Off to look for a 33mm Steel piston for this whacker ? LOL

 

[farrell]

Oh what a boring night!

Usually have 3 machines to run.......

Not tonight!

I gots 1

Half hour cycle time to boot!

Gonna be a LONG night!