Sure is quiet in here....do I need to start a fight?

[Cantdog]

Well got the tank all cleaned out...was funny......a layer of rust on every surface....but brushed right away leaving bright clean metal under...had to take the fuel filler and petcocks out.....bad gasoline came out...about three gallons of the brownest nastiest crap you ever saw....scrubbed with a long handled brush......then high pressure water....repeated and drained many times until no more rust came out...then 150PSI air until all dry...then another water fit....then more air....time for another tall green can and reassemble.....newest MC I own...least miles....roughest shape...due to time...But we shall over come......worst come to worst it will get a dose of Cream..not fond of it but it does work......but I think with regular use all will be fine.....

 

[Stihl 041S]

Oh what a boring night!

Usually have 3 machines to run.......

Not tonight!

I gots 1

Half hour cycle time to boot!

Gonna be a LONG night!

Yeah. Rob#2 has run times of 5-8 hours. Change inserts a couple of times.

Large hard impellers. Gots to run slow.

Bang. Bang. Bang. .......

Drives him crazy. You just wait till the insert goes away and it gets REAL loud.

Hey Adam

Hay John

 

[IEL]

Just letting you guys know that I might not be on that much for the next few weeks. I have a lot of stuff going on, and people visiting. I don't have much time to be on my azz right now.
I will try and drop by in the evenings when I can.
Not sure if I will be back on tonight. Just letting you guys know so you don't get worried if I am away for a few weeks. This is about the only forum I have time to be on anymore.
I should be back to my normal loudness in 3-4 weeks.

 

[farrell]

Yeah. Rob#2 has run times of 5-8 hours. Change inserts a couple of times.

Large hard impellers. Gots to run slow.

Bang. Bang. Bang. .......

Drives him crazy. You just wait till the insert goes away and it gets REAL loud.

Hey Adam

Hay John

Hey Rob!

 

[dancan]

Hey Rob !
Can you make a rivet tool so we can turn 22lr into rivets or larger brass even ?

 

[tbone75]

Where did all the SLACKERS go ?

 

[tbone75]

Hey Rob !
Can you make a rivet tool so we can turn 22lr into rivets or larger brass even ?

Kinda like a flaring tool on one end and a flat for the other ?

 

[tbone75]

Wonder if Smurf got his pool cooled down ? It would suck to be to hot today ! Wouldn't do much good to get in the thing !

Got everything watered , now I am soaked in sweat ! Nasty out there stihl !

 

[dancan]

While you were out playin with water I was out lookin over the water at Morocco out there in that direction sumwhere LOL
Nice and cool right on the Atlantic

 

[farrell]

I get to spend my boring night in the air conditioned shop!

 

[roncoinc]

oh my,,,,,,,,,,,,,,,,,,,,,,..........

dont know how much longer i can handle this living in paradise deal !

mornin started with my carpenter showing up early to get some work done on the house before it got to hot.

then my older friend Phil showed up with his strimmer he tried to take the plug out with an adjustable wrench and broke it !! LOL !!
he's the guy loves my little makita

got the plug out and it runs fine now with a used one i had..

he also had a squeel strimmer from a neighbor ,,

wouldnt start,,,the owner brot it to a steelership and,,,,,,,,,,,,,,,,, they told him ignition module gone and $185 to fix it !!!

PLUS they said the drive shaft was bad ,,,how they knew that if it wouldnt start is beyond me !!!

THEN they charged him $35 to tell him how much they were going to SCREW him for !!!

i re- seated the spark plug boot tight on it and it started right up and whacked weeds fine !!!

not a thing wrong with it but the plug wire loose !

drive is fine,runs fine....shut off switch is broke,,,choke it to shut off...no big deal,,,,zero charge to fix

screw them steelerships !! no wonder i hate them !!!!! :mad2:

day got better from there...

cooled pool down and did the ussuall routine....

friends came over for a swim and food.

did a garden salad with everything from the garden..

did a baked flounder dish on the grill..

bread crumbs,panko,olive oil,,butter,,herbs and spices,parmesan cheese,,,kinda like a fish pizza

dunno how much longer i can live like this,,starting to wear on me

pic of supper .

 

[Stihl 041S]

Hey Rob !
Can you make a rivet tool so we can turn 22lr into rivets or larger brass even ?

Annealing first helps a lot. Easy to do.

Crimped or impact?

You could waspwaist first.

Sketch?

 

[pioneerguy600]

Been a nice evening for ,sanding fiberglass,.....LOL

 

[roncoinc]

was sitting here in the air conditioning wondering how to finish the day and it hit me !!

the sleeppies hit me..

time to crawl in betwen the nice clean,crisp,cool sheets and dream about another fine lazy,,lovin life day in paradise again tomorrow

i dont know how people with that " J " and w**k deal manage


DOWN time !!!!!!!!!!!!!!!!!!!!!!!!!!

 

[tbone75]

was sitting here in the air conditioning wondering how to finish the day and it hit me !!

the sleeppies hit me..

time to crawl in betwen the nice clean,crisp,cool sheets and dream about another fine lazy,,lovin life day in paradise again tomorrow

i dont know how people with that " J " and w**k deal manage


DOWN time !!!!!!!!!!!!!!!!!!!!!!!!!!

Hey Smurf ! Down time was mine ! :msp_mad:

I think ?? LOL

 

[tbone75]

That fish looks real good !!

 

[Stihl 041S]

Hey Smurf ! Down time was mine ! :msp_mad:

That's what she said......

 

[tbone75]

That's what she said......

Hey Uncle Mongo !!

 

[Stihl 041S]

Hey Uncle Mongo !!

Hey lad.

How you doing?

Won't ask what........)

 

[tbone75]

Hey lad.

How you doing?

Won't ask what........)

Doing OK , rolling ciggs. LOL