Thanks 04ultra

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Bermie

Addicted to ArboristSite
Joined
Jun 8, 2005
Messages
2,043
Reaction score
385
Location
Both sides of the planet
Thanks to 04ultra, I fixed my saw today.

My MS250 (yes I know, plastic saw, but a real runner) stopped oiling, 04 had sent me the workshop manual some time ago.
I printed off the relevant pages and went through everything (except taking out the oil pump) drained the tank,cleaned the vent, removed and inspected the filter and hose, checked the worm drive..no drama, and VOILA, it's working again!!!:greenchainsaw: :clap:

THANKS!!!

(isn't AS great!)
 
Thanks to 04ultra, I fixed my saw today.

My MS250 (yes I know, plastic saw, but a real runner) stopped oiling, 04 had sent me the workshop manual some time ago.
I printed off the relevant pages and went through everything (except taking out the oil pump) drained the tank,cleaned the vent, removed and inspected the filter and hose, checked the worm drive..no drama, and VOILA, it's working again!!!:greenchainsaw: :clap:

THANKS!!!

(isn't AS great!)



Glad I could help Bermie....


.
 
Thanks to 04ultra, I fixed my saw today.

My MS250 (yes I know, plastic saw, but a real runner) stopped oiling, 04 had sent me the workshop manual some time ago.
I printed off the relevant pages and went through everything (except taking out the oil pump) drained the tank,cleaned the vent, removed and inspected the filter and hose, checked the worm drive..no drama, and VOILA, it's working again!!!:greenchainsaw: :clap:

THANKS!!!

(isn't AS great!)

If you ask real nice he might make you an avatar. It's just cause he can:rock:
 
Quit it you guys........
youre making him blush:blush: :blush: :blush:
 
Hey Troll - it's about ULTRA, not the 250

Quit the 250 talk.. you'll just encourage Sawtroll to tromp all over this tread..:mad:
 
I printed off the relevant pages and went through everything (except taking out the oil pump) drained the tank,cleaned the vent, removed and inspected the filter and hose, checked the worm drive..no drama, and VOILA, it's working again!!!:greenchainsaw: :clap:

THANKS!!!

(isn't AS great!)

Bermie I didnt know you spoke Italian :blob2: :blob2: :blob2:
 
We shouldn't be picking on the Troll. He's a good guy. Most people here are good guy's that I know of. Except one. Don't worry, it's not you Manual! :cheers:
 
Thanks to 04ultra, I fixed my saw today.

My MS250 (yes I know, plastic saw, but a real runner) stopped oiling, 04 had sent me the workshop manual some time ago.
I printed off the relevant pages and went through everything (except taking out the oil pump) drained the tank,cleaned the vent, removed and inspected the filter and hose, checked the worm drive..no drama, and VOILA, it's working again!!!:greenchainsaw: :clap:

THANKS!!!

(isn't AS great!)

Glad I could help Bermie....


.



Whatever, some guys get all the glory!!!
 

Latest posts

Back
Top