Tons of older husky stuff

[retoocs555]

Lots of older parts saws and parts. $250 for everything, shipped within the lower 48. Especially there are lots of parts for 266, 268, 61's but there is a pretty wide variety.

 

[retoocs555]

2100

I also have a pretty well picked over 2100 parts saw available seperately for $40 shipped. The crank case is broken off at the bar studs.

 

[Lawn Masters]

do you have just a 268 carb and mounting block? I need one for my saw.

 

[retoocs555]

do you have just a 268 carb and mounting block? I need one for my saw.

Is that the same on a 266?

On another note the 2100 parts saw is spoken for. Thanks:biggrinbounce2:

 

[Lawn Masters]

I dont think it is. the impulse line isnt a hose, its drilled into the cylinder and intake block.

 

[NWCS]

the 266 impulse comes through the carb block, not a hose.

 

[Lawn Masters]

I was thinking it was different, guess I'm wrong AGAIN. if a 266 block with a carb from a 268 will work. I've got a 268 jug I want to do some experimenting on, but I dont have a carb or intake block so I cant really even run it till those parts are on hand.

 

[Freakingstang]

The 266 and 268xp should be indentical with the exception of the 266 being open port and the 266 closed, although the 268 came later with both open and closed cylinders. They share the other same parts as the 272. I don't know about the carb setup on the 61's. I've got a 268xp that is being upgraded to the 272 in the line of project saws myself.

-Steve

BTW, if one of the sponsors can't help you out on the carb, My local Amish husky dealer has a stockpile of dead 268/272's that i'm sure I could get a carb from.