Total Bar Group Buy until Monday the 24th!

[watsonr]

You asked and here it is! One week, sale runs now until next Monday the 24th. I'll order Tuesday the 25th and ship by Saturday the 29th. Same as last time, you PM me your PayPal user name and what you want by the numbers and quantity. Include your real name in the PM and address so that I may get a jump start on the packaging and labels, I had a hell of a time trying to figure out who you really were against your screen names because I didn't know everybody by real name.

I'll PayPal you an invoice for the cost of the bars and shipping. Shipping will be a flat $12.50 for two bars. $17.50 for 3 or more and that's for bars up to 28". Anything over 28" is an additional charge of $5. (2@$12.50 and one 36" for $5 more is $17.50 + $5 = $22.50) Ask if your not sure!

I ordered some of the laminated bars last time and they were fine for light-medium duty and limb trimmers, I didn't like the nose radius, it was tight. The Hard Nose bars were nicer but appeared to burn the tip by changing it a color that looked burned, however, the tip was fine and I haven't seen excessive wear from it. These are Tsumara steel replaceable tip except where indicated. I can get Stihl bars up to 28" and no bigger, AGAIN...they are not made by this company for Stihl in 32/36/42" or longer.

I can get Husky Large mount to 42" and 3/8 .050 in 32" only, after 32" it's .063 gauge only..... get with me for pricing.

This is for bars to 28" only, nothing bigger unless you speak directly to me and it will be a different price. I think the 42" was $104 if I remember correctly... but ask and I'll get you a price for a special bar (anything not on this list).

Tsumara steel, solid piece construction, sprocket nose replaceable tip

Dolmar/Husky in Large mount 3/8 .050 bars
T415FV4 for 16" $35 60DL
T417FV4 for 20" $45 72DL
T459FV4 for 24" $55 84DL
T423FV4 for 28" $65 93DL

Stihl (fits 026/028S/034/036/039/044/460/660 and MS260/270/280/290 (common mount for most saws)
T200PV2 for 16" .325 .050 $35 67DL
T201PV2 for 18" .325 .050 $56 74DL
T200FV4 for 16" .375 .050 $35 60DL
T202PV2 for 20" .325 .050 $45 80DL
T202FV4 for 20" .375 .050 $45 72DL
T204FV4 for 24" .375 .050 $55 84DL
T241FV4 for 28" .375 .050 $65 91DL


Two sizes for the Husky/Dolmar in small mount Hard Nosed. Good solid bars that should last awhile. I don't know why the 20" hard is more than the 20" replaceable tip... but they don't have them in Super Pro.

Fits 340/345/346/350/353/357 Hard Nosed non-laminated bars
T489HTU for 16" .375 or .325 .050 $35 60/66DL
T381HTU for 20" .375 or .325 .050 $56 78/72DL

This is the list and unless you speak directly to me, this is the list. NO laminated bars will be ordered..Period! Some of you ordered laminated bars and didn't like them, asked for a refund... that effects the buy, I ate those bars.

Order up... ends Monday the 24th!

 

[watsonr]

2 sold... we need at least 5 of them to make this work... and as an incentive... I'm willing to add additional reduction if we go over 50 bars, I'll drop the price right to the floor. I'd rather see you get a better deal if at all possible and have no issue going back to Total dealer and choking him for that savings!

The cost of shipping is;
1-2 bars $12.50
3-? bars $17.50
Additional length is $5

This pays for the box, packing material and shipping charge... ask anybody that got one last time, they were packed good!

 

[Dan_in_WI]

If you can get bars for a Dolmar 133 Super (Oregon D033) I'll take a 20 and a 28 in 3/8" .050.

 

[tdi-rick]

Randy, if the hard nose bars are Tsumura you won't find a harder wearing hard nose, they are one tough bar according to those that have used them.

 

[DSS]

I'll take a couple. I'll PM you when I get to a real computer.

 

[watsonr]

Randy, if the hard nose bars are Tsumura you won't find a harder wearing hard nose, they are one tough bar according to those that have used them.

They are the same steel as the Super Pro version.... Tsumara.

 

[watsonr]

I'll take a couple. I'll PM you when I get to a real computer.

For two bars, the shipping should be right at $17.50 to send them up there. When ready, I'll invoice you for the bars and $17.50 for the two to Canada. If it's over or under, we'll work it out

 

[DSS]

For two bars, the shipping should be right at $17.50 to send them up there. When ready, I'll invoice you for the bars and $17.50 for the two to Canada. If it's over or under, we'll work it out

Sounds good. Funny how everybody else has to get circa $40 to ship 2 bars here.

:monkey:

 

[watsonr]

Sounds good. Funny how everybody else has to get circa $40 to ship 2 bars here.

:monkey:

Last time I shipped to Will Parris it was pretty cheap if I remember correctly, like $20. I'll ship up there no problem! AUS isn't a problem either, Greece.... whatever, just pay the cost and a little waiting time for customs.

 

[moody]

I don't get paid until the 25th :bang:

 

[groundup]

There isn't one listed but can you get one that will fit a 550?

 

[watsonr]

There isn't one listed but can you get one that will fit a 550?

A Husky? That the small mount? It's not listed in the catalog either, why I'm asking. Someone here should be able to tell us what mount.

 

[groundup]

A Husky? That the small mount? It's not listed in the catalog either, why I'm asking. Someone here should be able to tell us what mount.

Yeah, I know they are new but they are not that new. I need an 18 or 20" that will fit the 550

 

[watsonr]

Yeah, I know they are new but they are not that new. I need an 18 or 20" that will fit the 550

Someone tell us the mount please....

 

[elanjoe]

You asked and here it is! One week, sale runs now until next Monday the 24th. I'll order Tuesday the 25th and ship by Saturday the 29th. Same as last time, you PM me your PayPal user name and what you want by the numbers and quantity. Include your real name in the PM and address so that I may get a jump start on the packaging and labels, I had a hell of a time trying to figure out who you really were against your screen names because I didn't know everybody by real name.

I'll PayPal you an invoice for the cost of the bars and shipping. Shipping will be a flat $12.50 for two bars. $17.50 for 3 or more and that's for bars up to 28". Anything over 28" is an additional charge of $5. (2@$12.50 and one 36" for $5 more is $17.50 + $5 = $22.50) Ask if your not sure!

I ordered some of the laminated bars last time and they were fine for light-medium duty and limb trimmers, I didn't like the nose radius, it was tight. The Hard Nose bars were nicer but appeared to burn the tip by changing it a color that looked burned, however, the tip was fine and I haven't seen excessive wear from it. These are Tsumara steel replaceable tip except where indicated. I can get Stihl bars up to 28" and no bigger, AGAIN...they are not made by this company for Stihl in 32/36/42" or longer.

I can get Husky Large mount to 42" and 3/8 .050 in 32" only, after 32" it's .063 gauge only..... get with me for pricing.

This is for bars to 28" only, nothing bigger unless you speak directly to me and it will be a different price. I think the 42" was $104 if I remember correctly... but ask and I'll get you a price for a special bar (anything not on this list).

Tsumara steel, solid piece construction, sprocket nose replaceable tip

Dolmar/Husky in Large mount 3/8 .050 bars
T415FV4 for 16" $35 60DL
T417FV4 for 20" $45 72DL
T459FV4 for 24" $55 84DL
T423FV4 for 28" $65 93DL

Stihl (fits 026/028S/034/036/039/044/460/660 and MS260/270/280/290 (common mount for most saws)
T200PV2 for 16" .325 .050 $35 67DL
T201PV2 for 18" .325 .050 $56 74DL
T200FV4 for 16" .375 .050 $35 60DL
T202PV2 for 20" .325 .050 $45 80DL
T202FV4 for 20" .375 .050 $45 72DL
T204FV4 for 24" .375 .050 $55 84DL
T241FV4 for 28" .375 .050 $65 91DL


Two sizes for the Husky/Dolmar in small mount Hard Nosed. Good solid bars that should last awhile. I don't know why the 20" hard is more than the 20" replaceable tip... but they don't have them in Super Pro.

Fits 340/345/346/350/353/357 Hard Nosed non-laminated bars
T489HTU for 16" .375 or .325 .050 $35 60/66DL
T381HTU for 20" .375 or .325 .050 $56 78/72DL

This is the list and unless you speak directly to me, this is the list. NO laminated bars will be ordered..Period! Some of you ordered laminated bars and didn't like them, asked for a refund... that effects the buy, I ate those bars.

Order up... ends Monday the 24th!

Are they the shiny bars?

 

[watsonr]

Are they the shiny bars?

Post #69, see for yourself.

http://www.arboristsite.com/chainsaw/230434-5.htm

 

[elanjoe]

Post #69, see for yourself.

http://www.arboristsite.com/chainsaw/230434-5.htm

thanks for the quick answer

 

[tlandrum]

550 is small mount

 

[KenJax Tree]

The triple 5 is small mount also if anyone want to know.

 

[EarlyStarts]

We got a chance to hit 50? What kind of deal we talking?