Trade or sell my Vermeer 2000

[gtrees]

:msp_tongue:Want to get rid od my 2000xl. 355 hrs, winch, cat 3126. I would love to have a 1590 or 1890 bandit. Anybody wanna do some dealing?

 

[superjunior]

too heavy, but I'll trade ya a slightly used 1800 (with winch) for it..

 

[skinnyd]

Pics?

 

[superjunior]

I was only kidding, your 2000 is probably worth a great deal more then my 1800. It's a 1999 with about 1800 hrs on it.

 

[gtrees]

2000 vermeer

Pics?

This site is new to me so bare with me. I'll get them for you tomorrow. How interested are you? I bought this machine two years ago in Alabama off of eBay. Had the local Vermeer dealer install a winch. I have put maybe 10 hrs on it. It's currently my 1400 back up.

 

[gtrees]

I was only kidding, your 2000 is probably worth a great deal more then my 1800. It's a 1999 with about 1800 hrs on it.

Buy it outright.

 

[superjunior]

that's gotta be one heavy sonofagun, what does it weigh? you had the winch installed so I'm guessing no grapple? you might want to list it in the classified section of the forum, there's actually a few bandits in there that sounds like what your looking for

 

[gtrees]

14000 lbs. I tried putting it in there. Ill try again. No grapple

 

[mattfr12]

14000 lbs. I tried putting it in there. Ill try again. No grapple

their not super heavy the morbark we are tugging around with the grapple i think is in the 14k range. but 14k can be heavy if your chipping into a one ton forget about it you would have to move one of them at a time. go dump the chips then come back for the chipper.

my k-boom has a 300 hp motor in it and it will snap that chipper around like no body's business with a full load of chips. 35-40mph up hill. hook it up to the 250hp cat its 25mph up hill its amazing how much of a difference that 50hp makes in these bigger trucks.

 

[gtrees]

their not super heavy the morbark we are tugging around with the grapple i think is in the 14k range. but 14k can be heavy if your chipping into a one ton forget about it you would have to move one of them at a time. go dump the chips then come back for the chipper.

my k-boom has a 300 hp motor in it and it will snap that chipper around like no body's business with a full load of chips. 35-40mph up hill. hook it up to the 250hp cat its 25mph up hill its amazing how much of a difference that 50hp makes in these bigger trucks.

Sorry. The weight is 14799 to be exact.

 

[superjunior]

their not super heavy the morbark we are tugging around with the grapple i think is in the 14k range. but 14k can be heavy if your chipping into a one ton forget about it you would have to move one of them at a time. go dump the chips then come back for the chipper.

my k-boom has a 300 hp motor in it and it will snap that chipper around like no body's business with a full load of chips. 35-40mph up hill. hook it up to the 250hp cat its 25mph up hill its amazing how much of a difference that 50hp makes in these bigger trucks.

so true. I think my big trucks are only rated around 200 hp and they are slugs going up hill empty - loaded we're talking about jogging speed maybe.

 

[mattfr12]

so true. I think my big trucks are only rated around 200 hp and they are slugs going up hill empty - loaded we're talking about jogging speed maybe.

what motors? you can usually get them turned up for a couple hundred bucks at the dealers. i had my cat turned up from 210-250. made a nice difference. or their are chips out their that help a lot.