Walbro carb differences

[BrettS]

What's the difference between a Walbro HDA 52A and a Walbro HDA 154A (aside from linkages).
Has anyone swapped linkages between carbs?.

 

[hotshot]

For a Husqvarna saw? You can go to the Walbro website, print the BOMs for the two carbs, & then compare them side by side.

First glance shows that the venturis are the same size, so it's likely that the shafts w/ linkages will swap out.

 

[BrettS]

43 views and nobody knows?,

For a Husqvarna saw? You can go to the Walbro website, print the BOMs for the two carbs, & then compare them side by side.

First glance shows that the venturis are the same size, so it's likely that the shafts w/ linkages will swap out.

Yes, for my Husq 350
I went onto the Walbro site, couldn't find anything on those two carbs (maybe I searched wrong or held my tongue in a wrong position, I don't know).
Wanting to know which is the better carb and using what I have until I can scratch up the coin for a 346 cyl and suitable carb.

 

[BrettS]

Top left Stihl 015 HDC 17A. Top right Husq 372 EL2B.
Bottom left Unknown HDA52A. Bottom right Husq 350 HDA 154A