I have an 064 stihl with a walbro wj6a carb. Does anyone know the proper height to set the metering lever at?
Walbro wj6a
- Thread starter Tml061583
- Start date
Help Support Arborist Forum:
Shop manual says:
Important: The upper edge of the inlet control lever must be flush with the metering diaphragm seating face. If necessary, use suitable pliers to carefully bend the lever.
Important: The upper edge of the inlet control lever must be flush with the metering diaphragm seating face. If necessary, use suitable pliers to carefully bend the lever.
