Want to Buy 50"+ Stihl bar

[manwithsaw]

For an 051.
Don't want to have to break out the crosscut...

 

[kimosawboy]

Might be a tad too much bar for that saw....http://www.baileysonline.com/Chains...CSB-S2-50-63-4.axd?PartFinderType=BarSelector
You might want to think about de-governing the carb or changing the piston/cylinder out for an 075/076. to run a larger bar..

G Vavra

 

[manwithsaw]

Might be a tad too much bar for that saw...
You might want to think about de-governing the carb or changing the piston/cylinder out for an 075/076. to run a larger bar..
G Vavra

Yes, in a jam so working around the 051. Thanks for the link.
How can the carb be degoverned? Any tuning tricks after?
Hoping to swap the p/c for more power asap when money's right, but it's the older 051 so going to a pro modder.

 

[backhoelover]

For an 051.
Don't want to have to break out the crosscut...

hate to get in a fist fight with one of them guys

 

[manwithsaw]

hate to get in a fist fight with one of them guys

or an arm wrestling wager