Want to Buy wanted cp70 mac carb

[cobey]

i need a cp70 carb for my cp70 that doesnt have one, pm me if you can help

 

[ChoppyChoppy]

What is the make of teh carb. Photos would help. I have two 4ftx8ft drawers of carbs. Might even have a new one.

 

[cobey]

What is the make of teh carb. Photos would help. I have two 4ftx8ft drawers of carbs. Might even have a new one.

I dont have the old one, someone put a 10-10 carb on it.. way too small I will try to find out what carb it is

 

[cobey]

it says on chain saw collectors walbro SDC uses a d10 kit???

 

[Eccentric]

Almost all 10-series Macs use a Walbro SDC variant. There were many different SDC's, with differing throttle bores, mixture needles, and other characteristics.

Some later 10-series saws had Zama carbs instead. A very few had Tillotson HS carbs. I rebuilt a PM-850 that was equipped with an HS111.

 

[awol]

The cp70 needs a sdc18 with the .820 throttle bore.

 

[cobey]

thanks Alan for the help

 

[cobey]

bump now we know what size it is

 

[Modifiedmark]

What did the CP-55 use? I think I got a carb on a junker somewhere...

 

[cobey]

I will have to ask Alan..

 

[cobey]

thanks but Alan says its smaller