Worth swapping Dolmar 120si carb into a super120

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

vw_motorsports

ArboristSite Guru
Joined
Jun 21, 2009
Messages
729
Reaction score
176
Location
ma
I have a 120s super that runs great and a complete 120si carb setup. My understanding is the only difference in the two is the carb...would I see a noticeable difference swapping out the carbs?
 
I believe the HP rating is the same for both saws.

The 120Si has an injector on the carb to put a shot of fuel in the carb to make starting easier.

It also has a choke lever that flips up rather than pull out.

I have owned and run both saws. I could not tell and difference in the way they cut, but the 120Si was easier to start.
 
I just came across 10 dolmar sachs chainsaws all different models. Two 120si two 510 111 114 123 and 3 I don’t know what model they are. One of the 120si and one 510 run. The others are parts. Let me know if anyone needs parts.
 

Attachments

  • 281E08D2-65DE-468B-AEBC-2044CD517165.jpeg
    281E08D2-65DE-468B-AEBC-2044CD517165.jpeg
    2.6 MB
  • 345581F4-4A45-4E93-8D8C-4931818A6BD9.jpeg
    345581F4-4A45-4E93-8D8C-4931818A6BD9.jpeg
    6.3 MB
  • 97F1470B-3969-462B-AB4D-73E35D866ECE.jpeg
    97F1470B-3969-462B-AB4D-73E35D866ECE.jpeg
    2.2 MB
  • C88A22A9-FC2F-4072-9A6F-3295057E0DC1.jpeg
    C88A22A9-FC2F-4072-9A6F-3295057E0DC1.jpeg
    2.3 MB
Went back to the place I purchased the saws. I found parts still in the plastic for differ saws and 16 inch bars still in plastic
 
Back
Top