Would it be worth milling this?

[logsnstuff]

A neighbour cut down this Japanese mountain cherry (I'm in Japan). I'm ready to do my first milling, so will do this just for the experience, but it looks like a whole lot of rot in the middle. The brown parts are not soft, though.

Would you mill it? Is it worth the gas and time? Is there anything useable in there?

Appreciate any comments.

 

[buzz sawyer]

What diameter/length?

 

[J D]

Looks like it will have some character when milled... be sure to post some pic's

 

[logsnstuff]

Max diameter is 25cm/10in and three logs of 1.2m/4ft each.

 

[logsnstuff]

I'll be sure to post pics, good or bad!

 

[buzz sawyer]

Max diameter is 25cm/10in and three logs of 1.2m/4ft each.

That's pretty small. Be sure to support the log to keep it from moving.

 

[HankinOhio]

cost of fuel is a pretty cheap price to pay for the experience gained, especially if you just starting. Learn the basics on junk logs before sawing a "good" log

 

[fields_mj]

If it's your first time, why not mill it? If you mess up, you're not out anything except a little time and fuel. The experience/practice should be worth at least that much.