wt246 carb on ebay

[jbone]

I found this on ebay just wanted to make sure I was getting the right one for my 026. Is it just me or does it looked oxidized in the pics?? Any input is appreciated!

http://cgi.ebay.com/Stihl-Walbro-WT...ryZ85915QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

 

[sedanman]

That's the one. Buy it quick, that's a good price.

 

[KMB]

I found this on ebay just wanted to make sure I was getting the right one for my 026. Is it just me or does it looked oxidized in the pics?? Any input is appreciated!

http://cgi.ebay.com/Stihl-Walbro-WT...ryZ85915QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

What model carb does your 026 have on it right now?

Kevin

 

[Lakeside53]

That's $25 after freight. Yep, decent price for that carb. You'll need the seal o-ring for the compensator end. If your saw does NOT use the compenstor, just put on the standard metering cover from your old carb.

Just for consideration - for a few $$ more you can get a brand new walbro WT194-1. The 426 is only adjustible within a limited range (usually o.k. for most simple muffler mods, but I have had two that I couldn't richen unough without re-jetting). The WT194 is adjustible across the entire range... The WT194 does NOT have the compensating end, but you just take it off your existing carb if you need it.

And Ultra - the answer is YES - as soon as the post picks up (even they can't get here today!).

 

[04ultra]

That's $25 after freight. Yep, decent price for that carb. You'll need the seal o-ring for the compensator end. If your saw does NOT use the compenstor, just put on the standard metering cover from your old carb.

Just for consideration - for a few $$ more you can get a brand new walbro WT194-1. The 426 is only adjustible within a limited range (usually o.k. for most simple muffler mods, but I have had two that I couldn't richen unough without re-jetting). The WT194 is adjustible across the entire range... The WT194 does NOT have the compensating end, but you just take it off your existing carb if you need it.

And Ultra - the answer is YES - as soon as the post picks up (even they can't get here today!).

THX Andy......I cant wait to try it out the 194....


.

 

[Lakeside53]

THX Andy......I cant wait to try it out the 194....


.

If I can find a big enough box, you'll have something else to drool over too...

 

[04ultra]

If I can find a big enough box, you'll have something else to drool over too...

Andy.........You da man ...


.

 

[jbone]

That's $25 after freight. Yep, decent price for that carb. You'll need the seal o-ring for the compensator end. If your saw does NOT use the compenstor, just put on the standard metering cover from your old carb.

Just for consideration - for a few $$ more you can get a brand new walbro WT194-1. The 426 is only adjustible within a limited range (usually o.k. for most simple muffler mods, but I have had two that I couldn't richen unough without re-jetting). The WT194 is adjustible across the entire range... The WT194 does NOT have the compensating end, but you just take it off your existing carb if you need it.

And Ultra - the answer is YES - as soon as the post picks up (even they can't get here today!).

thanks for the tip on the 194. I dont suppose those are on ebay as well? ABout how much is it worth spending on?

 

[Lakeside53]

thanks for the tip on the 194. I dont suppose those are on ebay as well? ABout how much is it worth spending on?

They LIST for $41, - often go for much less... and any walbro distribuator can get them..