WTB 32" bar for 920

[Pcoz88]

Still looking for 32 " bar for 920 jonsered.Any and all info would be much appericated.Thank-you.

 

[Cut4fun]

Still at cutters choice. What happen? Cutters choice has them for the 920 in 16"-36". The 32 is $52 and is sprocketnose replacement type 3/8 .058. 41174(220322S2) page 49 in their book.

 

[Pcoz88]

Thanks cut for fun,I forgot about them.:bang:

 

[Sethro]

I think if you get some bar studs out of a 630 2171/ 2186 2094 or a Jonsered saw that has the 9.0mm studs you might be able to retrofit them into your 920 and if,you won't have any problems finding a bar through Bailey's. I am not to familiar with the 920 as far as tensioner/ oiler and such.Talk to Gregg at Bailey's.

 

[Sethro]

If you can get bar studs out of or for a 2094/2095 they will work on your 920.Then you can use the (HU mount)Husky/Jonsered bars,and everything will line up.If you want to go that route,you will never have any trouble getting any brand or any size bar.

 

[Pcoz88]

thanks john,would a dealer be able to get studs?

 

[Sethro]

Yes,Talk to Gregg(Grande Dog) at Bailey's.Bailey's has Jonsered. There is a link in the sponser section.John

 

[Madsaw]

Pete.
I sent you the info on the bar I found. How is the saw running for you ?
Bob

 

[Pcoz88]

John, Iam waiting for a reply back from cutters choice.Madsaw,haven't had a chance to cut any wood with it yet.I might today 5/23.It sounds good.Ups left the packages at another adress ,they got rained on pretty good.:jawdrop: :greenchainsaw: Would the smaller studs work?

 

[Pcoz88]

Still looking for air fillters also.