hey guys,
i havent updated in awhile because both of my saws are out of commission. I also can't find the parts i would need, with certainty, to do the conversion. I figured this would be easy but I guess not. If I knew exactly what sprocket and bar i needed to buy for either .325 narrow kerf or 3/8 low pro i would buy it.
Western Building Center has had my 460 rancher for 2.5 months out of the 6.5 months that I have owned it. Originally I sent it off after 4 months because it was no longer oiling and it took them 7 weeks to get the saw back to me, they said it was gunked up because I was using vegetable oil so I had to pay them 80 dollars for the repair, ok fine. Well, they put the saw back together wrong. As soon as i fired it up it was clanging and vibrating uncontrollably so I took it back to the local WBC store and the chainsaw guy there immediately recognized the issue and had to send it back to their shop. That was 3 weeks ago. I called today and they haven't even looked at it yet. So despite the fact that my saw had to be sent back to them because of their poor repair work, I get put to the back of the line. I will 100% never buy a saw from WBC again, and I may never buy a husqvarna again because the stihl shop in town has a mechanic onsite that does all of the work instead of sending it to a shop 3 hours away.
In the meantime, my husqvarna 555 started having issues where it will run fine for about 5 minutes and then just loses power and dies and wont start, but I dont want to send it off to the WBC shop for repair for obvious reasons lmao