Sachs Dolmar 153

[oldpartsinasia-joe]

Here is what I have on my 133. There are no screws or pawls so I cannot start it

Hi Bhuver.

I have got the rachets. PM you.


-oldpartsinasia Joe

 

[Bhuver]

I dont think I need the ignition coil. Just the starter for the 153 saw I have. Much appreciated.

Brian

 

[BonScott46]

I have a 153 that was coverted to a winch unit. I have been meaning to part it out but haven't gotten around to it. I will put up some pics if anyone is interested. Shipping is from Sweden.

 

[Bhuver]

I have a 153 that was coverted to a winch unit. I have been meaning to part it out but haven't gotten around to it. I will put up some pics if anyone is interested. Shipping is from Sweden.

I would be interested and would like to see the pictures please. Thanks a lot

 

[BonScott46]

 

[BonScott46]

I also have the topend and intake track. I have no history on this unit. It looks as though the piston has eaten some metal possibly a circlip? The rings must have been replaced and probably the cylinder because it is very nice with only a very thin scratch from the top of the FW side upper transfer to the combustion chamber. Factory honing is readily visible from top to bottom all around as with the piston. Piston is very low hour and salvageable IMO, the rings are fine.

 

[Jacob J.]

I also have the topend and intake track. I have no history on this unit. It looks as though the piston has eaten some metal possibly a circlip? The rings must have been replaced and probably the cylinder because it is very nice with only a very thin scratch from the top of the FW side upper transfer to the combustion chamber. Factory honing is readily visible from top to bottom all around as with the piston. Piston is very low hour and salvageable IMO, the rings are fine.
View attachment 1065797View attachment 1065798View attachment 1065799View attachment 1065800

I see a few goodies there - sending a PM...

 

[oldpartsinasia-joe]

I have the piston assy and cylinder gasket if you need! (NOS)

144132100
965516010

-oldpartsinasia Joe

 

[lwmibc]

Bonus part. SEM Ignition Coil for DOLMAR 123, 133, 143.

119 140 210 IGNITION COIL S.E.M
*LAST PC, NOS (New Old Stock)*
View attachment 1065716

-oldpartsinasia Joe

Got my attention again Joe; that interests me. I have a 133 with failed ignition.

 

[oldpartsinasia-joe]

Got my attention again Joe; that interests me. I have a 133 with failed ignition.

Hi Iwmibc - someone's faster than you on this ignition coil. If the deal does not happen, you are next in line

-oldpartsinasia Joe

 

[lwmibc]

Hi Iwmibc - someone's faster than you on this ignition coil. If the deal does not happen, you are next in line

-oldpartsinasia Joe

Thanks; I am not surprised.