adjusting chain oiler husqvarna 435

[larrypac]

Can anyone tell me or show me with a photo where the adjustment screw for the chain oiler is on a Husky 435? Neither the owners nor shop manual are helpful. Thanks, Larry

 

[cscltd]

I think it’s a fixed rate oiler. No adjustment on most consumer saws

 

[rupedoggy]

Did pintos come with a cruise control?

 

[larrypac]

The manual has a pic showing which way to turn the screw (CCW for+ and CL for -), but not where it is. Maybe that's just generic Husky info since my 350 is like that. attached pic is from the 435 manual pic#16

 

[Bob Hedgecutter]

Have a look through your manual and see if there is a "Technical Data" page, go to it, read down left margin until you find the words " Type of oil pump " to the right of that it should read " Not Adjustable".

 

[larrypac]

Have a look through your manual and see if there is a "Technical Data" page, go to it, read down left margin until you find the words " Type of oil pump " to the right of that it should read " Not Adjustable".

From the shop manual, thanks.

 

[Bob Hedgecutter]

From the shop manual, thanks.

I dont do pictures- was this page I was meaning.

Technical data
Note 1: Noise emissions in the environment measured as sound power (LWA) in conformity with EC directive 2000/14/
EC.
Note 2: Equivalent sound pressure level, according to ISO 22868, is calculated as the time-weighted energy total for
different sound pressure levels under various working conditions. Typical statistical dispersion for equivalent sound
pressure level is a standard deviation of 1 dB (A).
Note 3: Equivalent vibration level, according to ISO 22867, is calculated as the time-weighted energy total for vibration
levels under various working conditions. Reported data for equivalent vibration level has a typical statistical dispersion
(standard deviation) of 1 m/s2.
435 435e 440e
Engine
Cylinder displacement, cm3 40,9 40,9 40,9
Cylinder bore, mm 41 41 41
Stroke, mm 31 31 31
Idle speed, rpm 2900 2900 2900
Power, kW/ rpm 1,6/9000 1,6/9000 1,8/9000
Ignition system
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna PR 17Y
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna PR 17Y
NGK BPMR 7A/
Champion RCJ 7Y/
Husqvarna PR 17Y
Electrode gap, mm 0,5 0,5 0,5
Fuel and lubrication system
Fuel tank capacity, litre 0,37 0,37 0,37
Oil pump capacity at 9,000 rpm, ml/min 13 13 13
Oil tank capacity, litre 0,25 0,25 0,25
Type of oil pump Not adjustable Not adjustable Not adjustable
Weight
Chain saw without bar or chain, empty tanks, kg 4,2 4,4 4,4
Noise emissions (see note 1)
Sound power level, measured dB(A) 112 112 112
Sound power level, guaranteed LWA dB(A) 114 114 114
Sound levels (see note 2)
Equivalent sound pressure level at the operator’s
ear, dB(A)
102 102 102
Equivalent vibration levels, a hveq (see note 3)
Front handle, m/s2 2,5 2,5 2,5
Rear handle, m/s2 3,2 3,2 3,2
Chain/bar
Standard bar length, inch/cm 13"/33 13"/33 13"/33
Recommended bar lengths, inch/cm 13-18"/33-46 13-18"/33-46 13-18"/33-46
Usable cutting length, inch/cm 12-17"/31-43 12-17"/31-43 12-17"/31-43
Pitch, inch/mm 0,325/8,25 0,325/8,25 0,325/8,25
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3 0,050/1,3
Type of drive sprocket/number of teeth Spur/7 Spur/7 Spur/7
Chain speed at max. power, m/sec 17,3 17,3 17,3