The official 029,290,310,390 build off thread.

Stumpys Customs · Nov 15, 2011

You read it right. Plumbcrazyjr & I will be hosting a Stihl 029-310 buildoff in April. The actual date will be narrowed down when it gits closer to the time. We will be integrating this build off with the next MO, AR, OK, KS GTG.

Here is a list of rules. The rules are subject to change if need be.

Saws- Any Stihl 029, 029 super, MS290, MS310, MS390

Must have working chain brake, choke, all factory covers

We will be runnin them on 91 non ethenol, mixed with Stihl ultra.

20" bar & .325 full chisel chain. We supply the bars, cost of chains is unknown @ this time.

We are plannin on usein oak to do the cuts. It may be a log of possibly cants strapped together.

3 cuts per saw, with at least two stopwatches per cut. Then the average of those times will be the official time.

One guy will run all the saws.

I'm gonna try to come up with some prizes fer the top three. Not sure what we're gonna come up with.
Eric & I will have saws in the lineup, but not able to win any prizes.

I hope this will be fun fer all that enter. It should be interesting to see how these saws turn out. :cheers:

Work Saw Collector · Nov 15, 2011

I am setting on a 29S that needs tore down anyway, its on like donkey kong.

Duke Thieroff · Nov 15, 2011

Me likey, looking forward to seeing what these are capable of.

Chris

atvguns · Nov 15, 2011

Work Saw Collector · Nov 15, 2011

Is this the GTG thread and a build off thread? The less threads the better. We can link the old thread to this one?

WoodChuck'r · Nov 15, 2011

If the dates work out I might show up with my 039.

sunfish · Nov 15, 2011

Cool man! I'll be there as a spectator...

Oh, can I throw in an old worn out 346 just fer fun? :msp_wink: :msp_biggrin:

Stumpys Customs · Nov 15, 2011

Work Saw Collector said:
Is this the GTG thread and a build off thread? The less threads the better. We can link the old thread to this one?

That'll be up to James Spencer ATVGuns:hmm3grin2orange:

WoodChuck'r said:
If the dates work out I might show up with my 039.

SAWEEEEEET :rock:

Stumpys Customs · Nov 15, 2011

sunfish said:
Cool man! I'll be there as a spectator...

Oh, can I throw in an old worn out 346 just fer fun? :msp_wink: :msp_biggrin:

Are you sure you wanna do that??? It'll be fun to throw a 20" .325 B&C on the 346 to see if it could hang. Just fer fun though after the buildoff runs. :clap:

Arrowhead · Nov 15, 2011

Now this is a build off I like. (and can afford) LOL. I can't make the GTG, but can I build one and ship it to have somebody run it?
Are pipes allowed?

sunfish · Nov 15, 2011

Stumpys Customs said:
Are you sure you wanna do that??? It'll be fun to throw a 20" .325 B&C on the 346 to see if it could hang. Just fer fun though after the buildoff runs.

Yeah man. Just fer fun... :msp_biggrin:

Stumpys Customs · Nov 15, 2011

Arrowhead said:
Now this is a build off I like. (and can afford) LOL. I can't make the GTG, but can I build one and ship it to have somebody run it?
Are pipes allowed?

That's kinda the reason fer the build off. These saws are plentifull & cheap. No pipes allowed in the build off, but would be interesting to see one run.

I'm thinkin of havein one guy run all the saws. Or maybe three, each guy make a cut with each saw. Got a while to figure it out

Stumpys Customs · Nov 15, 2011

Arrowhead said:
Now this is a build off I like. (and can afford) LOL. I can't make the GTG, but can I build one and ship it to have somebody run it?
Are pipes allowed?

That's kinda the reason fer the build off. These saws are plentifull & cheap. No pipes allowed in the build off, but would be interesting to see one run.

I'm thinkin of havein one guy run all the saws. Or maybe three, each guy make a cut with each saw. Got a while to figure it out

blsnelling · Nov 15, 2011

Can I bring my 390? :rock:

Jacob J. · Nov 15, 2011

blsnelling said:
Can I bring my 390?

Only if it's a 390XP clamshell edition.

I can help with a prize for one of the winners. I have some new bars and parts here that would be a good prize.

Stumpys Customs · Nov 15, 2011

blsnelling said:
Can I bring my 390?

If that's what it takes to git you down here:hmm3grin2orange: The 390xp is high on my want list.

Jacob J. said:
Only if it's a 390XP clamshell edition.

I can help with a prize for one of the winners. I have some new bars and parts here that would be a good prize.

I'll be in touch about that. Thanks.:msp_thumbsup:

Chris J. · Nov 15, 2011

Stumpy, y'all are going to get Saw Troll so excited he won't be able to stand the anticipation :laugh:

.

Hi, Niko!

Hedgerow · Nov 15, 2011

WoodChuck'r said:
If the dates work out I might show up with my 039.

Ahmah' thinkin' you need to shuffle on down to the Ozarks, and let me run that saw... :msp_sneaky:

Hedgerow · Nov 15, 2011

Stumpys Customs said:
If that's what it takes to git you down here:hmm3grin2orange: The 390xp is high on my want list.

I'll be in touch about that. Thanks.:msp_thumbsup:

This gonna be at Spencer's place?

Stumpys Customs · Nov 15, 2011

Hedgerow said:
This gonna be at Spencer's place?

Thats what I've been told. He's got a nice place fer a GTG.

Maybe this will be enough to git SawTroll on a plane to visit the Ozarks. :clap:

The official 029,290,310,390 build off thread.

Help Support Arborist Forum:

Stumpbroke

GTG Coffee Maker

Fill your hands, you SOB!

Addicted to ArboristSite

GTG Coffee Maker

[AS] OG

Fish Head

Stumpbroke

Stumpbroke

RARE BREED

Fish Head

Stumpbroke

Stumpbroke

Goosme!

Tree Freak

Stumpbroke

Addicted to ArboristSite

HACK

HACK

Stumpbroke

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!