Making some 044, 064, 066 Dogs. . .

Metals406 · Apr 1, 2013

Want in? They're gonna be 4-point -- laser cut from 3,mm Domex.

Domex is very, very tough stuff! :msp_thumbup:

These will fit: 044/MS440, 064, 066/MS660

trx250r180 said:
The roller catcher hole doesn't line up on the 460, so the outer dog is different because of that.

Because of info in the above quote, I will have to work up some 046/460 dogs as they're different enough to matter on fit-up. Or you can just slot the catcher hole to make it work.

Anyway, shipped to your door they're $24.00 (lower 48) -- I'm not making money, that's the cost plus a Priority Mail box.

Let me know, I'm fix'n to order soon.

Here's what they look like in the hand. (template wise)

Metals406 · Apr 1, 2013

Got one fella interested. . .

opcorn:

Jacob J. · Apr 1, 2013

I'll take a set...

Metals406 · Apr 1, 2013

BTW, thinking of buying myself some new fancy pants roller/catchers for the bottom of mine. . . Figured I'd see if Bailey's would do a deal on a batch. (Stihl 1122 650 7700)

I'm gonna get 4 fer myself, so let me know if you'd want a new one too, and I could throw it in the box with the dogs. I'd just charge cost for them as well.

:msp_smile:

Metals406 · Apr 1, 2013

Jacob J. said:
I'll take a set...

Good deal, I'll mark ya down for a set.

Work Saw Collector · Apr 1, 2013

Metals406 said:
BTW, thinking of buying myself some new fancy pants roller/catchers for the bottom of mine. . . Figured I'd see if Bailey's would do a deal on a batch. (Stihl 1122 650 7700)

I'm gonna get 4 fer myself, so let me know if you'd want a new one too, and I could throw it in the box with the dogs. I'd just charge cost for them as well.

:msp_smile:

I want the roller catcher on mine as well.

redoakneck · Apr 1, 2013

Will they fit a ms660? If so I would like a set with the roller catcher.

Metals406 · Apr 1, 2013

redoakneck said:
Will they fit a ms660? If so I would like a set with the roller catcher.

AFAIK, there isn't a difference, and these will fit just fine.

I'll mark ya down fer a set.

redoakneck · Apr 1, 2013

Thanks Metals!!! I will PM u my e-mail so I can Paypal.

bcorradi · Apr 1, 2013

These should also work on the 046 also without any modifications. You may just want to change the title to 044/MS440, 046/MS460, 064, 066/MS660 to clear up which models they will work on.

Metals406 · Apr 1, 2013

bcorradi said:
These should also work on the 046 also without any modifications. You may just want to change the title to 044/MS440, 046/MS460, 064, 066/MS660 to clear up which models they will work on.

Seems like when my buddy was templating off of 044 dogs, for a 460 -- the holes weren't exactly the same.

You're probably right though Brad, I'll see about amending the title.

bcorradi · Apr 1, 2013

Metals406 said:
Seems like when my buddy was templating off of 044 dogs, for a 460 -- the holes weren't exactly the same.

You're probably right though Brad, I'll see about amending the title.

Ok. I just looked at the IPL's and the bigger inner spikes for both an 044 and 046 are 1122 664 0506. To my recollection they should work fine on an 046/460, but JJ or someone else may know differently.

mdavlee · Apr 1, 2013

Here's all the part numbers. Pro safety lists two different sets. One for all but the 046/460.

440/460 inner 1122 664 0506
440 outer 1122 664 0501
460 outer 1128 664 0501
660 inner 1122 664 0508
outer 1122 664 0503

Trx250r180 · Apr 1, 2013

the roller catcher hole doesn't line up on the 460 ,outer dog is different because of that ,are you going to be making 461 dogs ?,those look like the 4 points i run now ,i like them a lot ,the 461 uses same inner as 460 and 440 outers on all 3 saws are slightly different

Metals406 · Apr 1, 2013

bcorradi said:
Ok. I just looked at the IPL's and the bigger inner spikes for both an 044 and 046 are 1122 664 0506. To my recollection they should work fine on an 046/460, but JJ or someone else may know differently.

Instead of the title, I just amended the first post. :msp_thumbsup:

mdavlee · Apr 1, 2013

We need to get the 441 and 461 part numbers for the spikes on here as well.

Metals406 · Apr 1, 2013

trx250r180 said:
the roller catcher hole doesn't line up on the 460 ,outer dog is different because of that ,are you going to be making 461 dogs ?,those look like the 4 points i run now ,i like them a lot ,the 461 uses same inner as 460 and 440 outers on all 3 saws are slightly different

Maybe it was the roller catcher hole I was thinking of, and he slotted the mount holes a bit to make it fit??

I could do 461's -- I'd need a saw to make it work, or a good template of the existing dogs to work with. The hardest part of templating in CAD, is the offset from the front of the inner/outer dogs, to the rear mounting positions. It takes me a while to make sure it's right.

Trx250r180 · Apr 1, 2013

here's a 460 outer ,shapes a little different than 440 one View attachment 287908

Metals406 · Apr 1, 2013

trx250r180 said:
here's a 460 outer ,shapes a little different than 440 one View attachment 287908

So, these would fit without modification, if a guy doesn't want to use the catcher, correct??

If he does want to use the catcher, a guy would have to modify.

Just want to clarify for the readers. :dizzy:

Trx250r180 · Apr 1, 2013

here is a 440 dog sitting on top of the 461 dog ,a lot different View attachment 287910

440 460 461 dog on left ,then 440/660 and 461 on right View attachment 287912

Making some 044, 064, 066 Dogs. . .

Help Support Arborist Forum:

Granfodder Runningsaw

Granfodder Runningsaw

Tree Freak

Granfodder Runningsaw

Granfodder Runningsaw

GTG Coffee Maker

Addicted to ArboristSite

Granfodder Runningsaw

Addicted to ArboristSite

Arboristsite.com Sponsor

Granfodder Runningsaw

Arboristsite.com Sponsor

Tree Freak

Saw polisher

Granfodder Runningsaw

Tree Freak

Granfodder Runningsaw

Saw polisher

Granfodder Runningsaw

Saw polisher

Similar threads

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!