Thoughts on liquid gasket for a MS290?

Rugged made
Wesspur
Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
C

CREC_Sawyer

ArboristSite Member
Joined
Apr 3, 2012
Messages
62
Reaction score
1
Location
Flagstaff, Arizona
Before wrapping up a top end rebuild on a Stihl MS 290 I needed to order some liquid gasket. Checked some posts and seems like the Threebond Gasket 1194 is the consensus choice. Any other thoughts or pearls of wisdom? I assume a 3.5 ounce container will last me for a few but am I mistaken? I've never used it so any insight would be appreciated.
Oh yeah, this site is amazing. Ever thankful.
Feel like I owe many people beers
 
Permatex Ultra Grey Motoseal works good. If you have an O'reilly close by they will more than likely have it in stock.
 
Yamabond 4, Hondabond, Threebond 1194, are all the same product. Dirko is good too, but usually more expensive. Whatever you use, just make sure you get the mating surfaces good and clean, and free of oil with Brake cleaner, or the like.
 
003-4.jpg
 
I use Dirko on seals and for dressing case gaskets but I feel like I loose some brain cells when I use it:dizzy:
I use permatex 518 on the cylinder base when no gasket is used.
 
I use the tip with the Threebond, then when I'm done, I take it off and go outside and use the blowgun on my compressor to clear it out. Works fine for me.
 

Similar threads

C
How does one compress the piston rings on a MS 290?
Replies
8
Views
537
67L36Driver
67L36Driver
J
Which saw to rebuild MS290 or 029 Super
2
Replies
21
Views
5K
joelbert
J

Latest posts

Back
Top