346xp felling dogs - spikes

[MP321]

Anyone know where to getting some good felling dogs/spikes for the 346xp? Ive looked around but could never find any. Any help would be appreciated!!

 

[cuinrearview]

What's your issue with the OEM ones?

 

[MP321]

What's your issue with the OEM ones?

Need a little more grab for thicker barked trees while climbing

 

[Ronie]

Here's some

 

[MP321]

Beautiful, thanks so much!

 

[Westboastfaller]

I used 357 OEM felling dogs on a ported 346
If you do get those 346 ones and find they are stopping the saw then you can shorten the bottom spike as it's longer on that style I see. If you angle them in then that way you reduce depth and length opposed from grinding from the inside.

 

[motolife313]

You could make your own out of some 16 gauge stainless.

 

[Ronaldo]

I made my own but it is more to hold these slim little saws up and keep them from rolling over when you set it down.

Sent from my SM-S320VL using Tapatalk

 

[67L36Driver]

I made my own but it is more to hold these slim little saws up and keep them from rolling over when you set it down.

Sent from my SM-S320VL using Tapatalk

I had a 445 & 450. Both would roll right side down on anything but the garage floor. [emoji51]

 

[MP321]

update: felling spikes i got off ebay for the 346 are a little overkill and take too much bar length away, but they are still pretty good overall. Gonna trim/shorten them up myself a bit, so no big deal : )

 

[Mike Gott]

I rehashed some 372 ones myself

 

[shadco]

I recently got a set from this fine forum member.

https://www.arboristsite.com/community/threads/custom-346xp-felling-dogs.250466/





.