I got a nice long Remington bar here that is missing its roller nose tip. I would be interested in a tip for it.
This is the style in this picture.
This is the style in this picture.
-
If you have bought, sold or gained information from our Classifieds, please donate to Arborsist Site and give back.
You can become a Supporting Member which comes with a decal or just click here to donate.
Want to Buy Remington roller nose tip
- Thread starter Modifiedmark
- Start date
Help Support Arborist Forum:
Coldiron
ArboristSite Operative
Like this one?
Sent from my E6810 using Tapatalk
Sent from my E6810 using Tapatalk
That looks like it, got any extra tips?
Coldiron
ArboristSite Operative
I don't but if you want the whole saw shoot me an offer.
Sent from my E6810 using Tapatalk
Sent from my E6810 using Tapatalk
I have a NOS small one, 2" dia.
And another on a 'not much count' bar.
But, I suspect you want a medium, 2 1/2" dia.
The large is 3 1/2" dia. [emoji15]
Not often encountered.
And another on a 'not much count' bar.
But, I suspect you want a medium, 2 1/2" dia.
The large is 3 1/2" dia. [emoji15]
Not often encountered.
I have a NOS small one, 2" dia.
And another on a 'not much count' bar.
But, I suspect you want a medium, 2 1/2" dia.
The large is 3 1/2" dia. [emoji15]
Not often encountered.
You suspect right Carl, 2 1/2" is what I'm looking for. I don't really even have a use for the bar yet, just putting it out that I am looking for a tip for it.
Of course if I did have a tip for it I would probably have to try that 32" bar out on the SL7A.
I have some Remington tips- I'll take a look and see what sizes they are.
Thanks JJ.
I sent what I THOUGHT was a PM yesterday, but the 'form' seemed unusual.....
I have two 20" Remington bars with roller nose, one is wider and does have the 2.5" DIA roller. - Nose part no. is 48950. The bar does have some rust scale, so woulda needed some spiffin' up anyway... Thus, I could either send the whole bar if you want it, or could pull the nose and send just that.
I have two 20" Remington bars with roller nose, one is wider and does have the 2.5" DIA roller. - Nose part no. is 48950. The bar does have some rust scale, so woulda needed some spiffin' up anyway... Thus, I could either send the whole bar if you want it, or could pull the nose and send just that.
Huh, I don't remember getting a PM? Oh well, thanks! I wasn't looking for anyone to breakup a good bar and tip. I have to wonder about the mount on that bar though, what was it on? The slots remind me of a Mac mount but that that bar slot looks huge.
I'm wondering if Remington made bars for dealers to sell for other makes? I know Poulan sold some Poulan branded bars with the Oregon universal mount so dealers could sell bar to other makes owners.
Then again, a lot of the Remington bars I see for the bigger saws were the universal mount.
Lets see if JJ comes up with something, if not we can revisit this?
I'm wondering if Remington made bars for dealers to sell for other makes? I know Poulan sold some Poulan branded bars with the Oregon universal mount so dealers could sell bar to other makes owners.
Then again, a lot of the Remington bars I see for the bigger saws were the universal mount.
Lets see if JJ comes up with something, if not we can revisit this?
I have no idea from whence it came, service-wise....!
Sure, just let me know if it is needed. Indeed, no greater love has a bar, than that it...in effect....lay down its life for a brother bar; that another may live and work-on.....
Sure, just let me know if it is needed. Indeed, no greater love has a bar, than that it...in effect....lay down its life for a brother bar; that another may live and work-on.....
Ah, I see what happened, your message went to my profile page. I never look there..
MM, I have a Mall roller tip - came off my GP. I replaced it with a Remington tip. It just snaps into place. I don't remember how good it was but it's yours if you want it.
..............
The large is 3 1/2" dia. [emoji15]
Not often encountered.
If you want to sell the large nose/bar i am interested. I have a NOS one that got damaged
That would be cool, same 2 1/2" tip right?
Do you have any idea what saw Renaissawnceman's bar came off of, or was it modified?
I seem to recall that used the head of a countersink screw for the adjuster.
What make/model escapes me.[emoji848]
What make/model escapes me.[emoji848]
Here's a photo of the end with measurements. It's about 1/4" thick.
There is a little play in the roller bearings but would probably work for limited use. PM me your address if you want it.
That bar isn't like the one on my GP but I've seen that style bar before - maybe on my 2MG.
Those dimensions ARE identical to the 2.5er on the Remington bar I have....
I would love to get some of the biggun's
