Velocity stack Info

[Joshjd49]

Has any one ever made a velocity stack for a saw? I am thinking about making one for my saw. Does any one have pictures of theirs to give me an idea to start with? or is there any things i should consider before i start. I am going to make one for my 056 super

 

[blsnelling]

 

[STEVEGODSEYJR]

Brad
How does the rear cover stay on? What is it attached too? I was just wondering because I wanted to doo this to my ported 064. Thanks Steve

 

[blsnelling]

Brad
How does the rear cover stay on? What is it attached too? I was just wondering because I wanted to doo this to my ported 064. Thanks Steve

Velcro They don't intend for you to use the rear cover. I just thought it was too ugly without it. No comments from the peanut gallery about how ugly you think it still is:greenchainsaw:

 

[TDunk]

Velcro They don't intend for you to use the rear cover. I just thought it was too ugly without it. No comments from the peanut gallery about how ugly you think it still is:greenchainsaw:

I think is looks better than the new Dolmar HD filter or the Shinny's IMO

 

[STEVEGODSEYJR]

Velcro They don't intend for you to use the rear cover. I just thought it was too ugly without it. No comments from the peanut gallery about how ugly you think it still is:greenchainsaw:

I think it looks bada$$!!!!

 

[blsnelling]

I think it looks bada$$!!!!

Not everyone will agree with you. It was a fun reversible mod with nothing more than a filter cover. I can tell you this. I've never cleaned the filter since the mod! The Outwear is a must.

 

[breymeyerfam]

brad, while we are on this, what kind of gains did you see from the stock setup to that. I'm contimplating my next move on my 660.

 

[Erick]

You mean like this????

 

[Erick]

Did you say on a 64??

<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/8z6uXif_5GU&color1=0xb1b1b1&color2=0xcfcfcf&hl=en&feature=player_embedded&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowScriptAccess" value="always"></param><embed src="http://www.youtube.com/v/8z6uXif_5GU&color1=0xb1b1b1&color2=0xcfcfcf&hl=en&feature=player_embedded&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" allowScriptAccess="always" width="425" height="344"></embed></object>

 

[wigglesworth]

Did you leave the intelicarb feature on it? Does it have any improvement over the stock HD setup?

 

[056kid]

Its gonna be kind of aquard on an 056.

 

[mile9socounty]

The only question I have for yall. Is it possible to buy the velocity stack get up from the web? I've played hell trying to find them around there. Seems less and less velocity stack get ups are making it to the local saw shops I go to.

 

[Joshjd49]

I have seen them on them before here is a video with one.
http://www.youtube.com/watch?v=WKCfCLAKux0
I am problaity going to make one not buy it
i am a machinst so it would be very easy

 

[dragrcr]

WOW nice setup, where did you get the filter, I am using a little foam filter on my 64 but that looks KILLER.

 

[FamilyTradition]

Beauty is in the eye of the beholder, and that is just plain beautiful! Now all I need to do is get a big enough saw to install a setup like that on! Wow!

 

[blsnelling]

I replaced the Intellicarb cover with the regular old style cover to keep debris out of the diaphragm.

 

[Bill G]

Here is a stack on a 820 that will be going in a Lancaster chassis.

Bill

 

[tdi-rick]

Here's a couple of questions.

Are you referring to a bell mouth or a 'velocity stack' as in a long air horn ?

What do you want to achieve with it ? increased power/RPM or is it just for the looks ?

Bear in mind that lengthening or just changing the length of the inlet tract changes the harmonics of the pressure wave there in the same way as changing the length of an exhaust. Lengthening it will probably move the power band down the rev range and will definitely change the tune.

There's some good reading on bell mouths here http://www.profblairandassociates.com/pdfs/RET_Bellmouth_Sept.pdf (Prof Blair is considered one of the the current guru's of two strokes, and his books sell for several hundred dollars)

 

[super3]

Here is a stack on a 820 that will be going in a Lancaster chassis.

Bill

Now that's a real V stack.