the all aussie dribble thread!

[derwoodii]

I was trying to beat this last week bah not a chance square filed lightened & tricked very fast... I threw my 310 chain pushin too hard,,, i though hmm that was sprocket going kaput but nope i just stretched it on the down cut and it flipped off on the up cut

 

[ozflea]

Maybe the bar wasn't as tight as you thought it was ?

 

[MCW]

Wot to do with your used cases?

Car tyre caps! lets see if they git pinched
View attachment 342966

I reload mine

 

[splitpost]

I reload mine

Me too

 

[MCW]

Me too

Do you have a .40 S&W to fit your valves?

 

[koomie]

The wife says 10 minutes before I go to work to light the fire shes cold. I'm hoping our winter does not follow that of the USA.

I should be ok cos even next years wood out the back of the section is dry and ready to go.

The wood under the plum tree surrounded by the wisteria is 3 year old bluegum and a bit of plum that was dead wood standing. Sparks were flying when I cut that up!

 

[splitpost]

Do you have a .40 S&W to fit your valves?

Not for along time,but i still reload my rifle ammo,still got some 38spl,357mag and i think i might even have some 44mag cases somewhere,still got some projies and primers too

 

[MCW]

Not for along time,but i still reload my rifle ammo,still got some 38spl,357mag and i think i might even have some 44mag cases somewhere,still got some projies and primers too

If you want to sell the .44 Mag stuff yell out. Just loaded 200 of them today.

 

[deye223]

1000 rounds ? whats the cal ,that's **** all .... I'm getting a .308w, good for 5000+ rounds of accurate service

7 mm rem mag





and for the range I use it at i need all the help i can get .

i have just started load development with the 180g VLD BURGER

 

[WidowMaker1]

them fluted barrels make any real difference to heat dispersion ,not shore if thats a heavy varmint barrel or not ?

 

[deye223]

them fluted barrels make any real difference to heat dispersion ,not shore if thats a heavy varmint barrel or not ?

YEP a heavy tube and no it's all bs on the cooling i would rather the extra weight with a smooth barrel but it's how they come

 

[WidowMaker1]

Wot to do with your used cases?

Car tyre caps! lets see if they git pinched
View attachment 342966

be careful you might get done for un-secured ammo storage ...lol

 

[deye223]

be careful you might get done for un-secured ammo storage ...lol

he will in that part of the country that i don't class as oz

 

[WidowMaker1]

YEP a heavy tube and no it's all bs on the cooling i would rather the extra weight with a smooth barrel but it's how they come

yeah didn't think they would do much, other than look like there doing something ..... . i was looking at cartridges and i see why the 7mm rem mag burns
barrels faster , looks like the 7mm Ultra mag would be even hotter again

 

[deye223]

when i rebarrel it will be in 7mm 300win mag

 

[ausneil 1]

.

That's an easy one Neil. Because it's 120HP it should have been running 3/4" harvester chain.

My goodness, 120hp would be a rush,,,, perhaps just a little optimistic but thanks. 3/4 chain will make it just a little nose heavy but the rooster tail it would produce...... wow.

Not running that cutty cutty chain will be what happened for sure

No Chris !!!. That saw did not have cutty cutty chain as you all very well know the Matt-ster flatly refused to allow me to use one, remember he even went so far as to produce a small video publicly saying the fact,,,, bastard even stated or commented on my height, which hurt deeply too I might add.

 

[MCW]

My goodness, 120hp would be a rush,,,, perhaps just a little optimistic but thanks. 3/4 chain will make it just a little nose heavy but the rooster tail it would produce...... wow.

But that's what you told me it was punching out when you were trying to justify the use of Cutty Cutty Long Time chain?

 

[MCW]

yeah didn't think they would do much, other than look like there doing something ..... . i was looking at cartridges and i see why the 7mm rem mag burns
barrels faster , looks like the 7mm Ultra mag would be even hotter again

The Ultra Mags are getting stupid and are generally reserved for people with more money than brains You sometimes have to be wary about barrel life claims too as a lot of these are made by benchrest shooters who say a barrel is worn out the second accuracy starts to drop by even a millimeter.
I love accuracy as much as the next bloke but I'm not binning a $1000 barrel just because it's gone from 1/2 MOA to 3/4 MOA.
If I miss any long range shots it's mainly because I get the bullet drop or windage wrong.

 

[ausneil 1]

Hard to be sure but i think the whole dam bar fell off,,,,, loose nuts i say

Well that's an assumption, accusing me for failing to do my pre race checks properly.
I think you are right, if they are not tight they will unwind within a couple of seconds.

 

[MCW]

Well that's an assumption, accusing me for failing to do my pre race checks properly.
I think you are right, if they are not tight they will unwind within a couple of seconds.

He wasn't talking about the bar nuts Neil. For goodness sakes man...