It is basically clone of RedMax G621 with different plastic parts - very similar mechanically to my clone. I have no idea if the port timing is the same, but it likely is. With a gasket delete, muffler mod and a little more intake width and duration it runs very well. Should weigh about 12.5lb.
I would suggest a fairly extensive disassembly, clean up of molding and casting flashing and a careful reassembly before you even run it.
From what I have seen from pictures the new plastic parts are a design improvement, but you can't swap on actual RedMax parts for repairs.
Post some pictures and videos of it - it will drive some people insane and cause them to post all sorts of stupid stuff!![]()
That is probably the model it is, however there are two basic Zenoah designs being cloned that overlap in displacement. This one, based on the G621, which is being made in 62cc, 72cc and I think even 82cc, although the larger ones don't seem to be coming into the US, only in OZ. The other, based on the G5000, in 45, 50, 52, 58cc and even hogged out to 62cc. The G621 design is maybe most of a lb heavier, but it has a larger carb and quad transfers, as well as 3/8 chain.there are three displacements available, 52cc, 58cc and 62cc. the 62cc looks like redmax 621 magnesium. some redmax parts would likely fit. (found on ebay)
If this is the add I expect it's at standard 52cc clone of the G5000 design: http://www.ebay.com/itm/Homdox-20-I...hash=item28187b6848:m:mN0cfKH4RK-xR36P8o-VjVg
I have no idea how they can title this: "Homdox 20-INCH 52CC/ 62CC Gas Chainsaw with Case SYL6" What does that even mean? Which is it?
Hell yeah Bubba!will a gas chain saw have more cc s if you remove the muffler
will a gas chain saw have more cc s if you remove the muffler
I remove all my mufflers.
at one time or another during repairs and inspections.![]()
Are you sure?They're great. They will out-cut a straight-gassed 562xp any day of the week.
Spark plug removed will give it a little more CC.will a gas chain saw have more cc s if you remove the muffler