motobike
ArboristSite Operative
I understand, that I will never get to these saws; better they go to active restorers or collectors.
Also I am prepared for the negativity, that we have seen when someone offers up just about anything on this site. Just remember, you may be selling something that is not pristine, sometime. Just better- If You can't say something good don't display your crude disposition on the internet.
I am still pulling out hidden saws; but I have about 30 with pics, now. Of course I would like to sell all at one time; we will see what happens. I did run a few of these but most came from trade-in's at saw shops. I will note the ones I had running.
The saws that I had running, at one time are McCulloch, 300, the Green Sears saw; both of these were low hour saws; never commercially used. And I had the Homelite 700 D running.
Shipping is going to be the problem; I can see it happening. On the shipping; I live about 40 minuets away from the closest Post Office; and still further away are UPS and Fed-Ex offices. So if someone wants a single saw or so; I will weigh the saw and give you the dimensions, then you can chose whatever shipper You want, These will probably fit in a 12" x 12" x" 12 box, or maybe a 16 x 12 x12 , or even larger, without the bar; if you want the bar, the shipping gets pricey . Send me the mailing label, pay for the box and packing; and then we will box it. So local pick-up is probably best. USPS doesn't usually charge a pick-up fee, at my address,; but FedEx, and UPS does, so we don't usually use them.
I will attach some general pics in this ad but I can get more detailed pics, just tell me what you need.
We have a mix of Mall, McCulloch, Homelite, David Bradley, Remington, Sears, Lancaster, Craftsman, Western Auto
McCulloch 1-43, 200, 300?, 3.25, 35, 300R, Mall 12A, Mall Remington GP, Remington Bantam, DAVID BRADLEY ?, 360 Gear, DB ?, Homelite ?, 420A, 26LCS, 700D- R, Super EZ, EZ, XL, Lancaster L-25, Sears and Craftsman, PowerCraft, Montgomery Wards
I also have about six (6) Homelite 150's, most with cases. All were running, when we were farming, Had a 150 on each tractor and utility vehicle, for that occasional limb or tree falling into the field. Have NOS Homelite parts too w/ manuals. No pics now, at another location.
This is what I have dug out so far, if you take them all, I will take less, Look at them, email me or PM as to what you want to pay. I will respond to all emails or pm's
Email me or PM through this forum
I am located near Altoona, PA



Also I am prepared for the negativity, that we have seen when someone offers up just about anything on this site. Just remember, you may be selling something that is not pristine, sometime. Just better- If You can't say something good don't display your crude disposition on the internet.
I am still pulling out hidden saws; but I have about 30 with pics, now. Of course I would like to sell all at one time; we will see what happens. I did run a few of these but most came from trade-in's at saw shops. I will note the ones I had running.
The saws that I had running, at one time are McCulloch, 300, the Green Sears saw; both of these were low hour saws; never commercially used. And I had the Homelite 700 D running.
Shipping is going to be the problem; I can see it happening. On the shipping; I live about 40 minuets away from the closest Post Office; and still further away are UPS and Fed-Ex offices. So if someone wants a single saw or so; I will weigh the saw and give you the dimensions, then you can chose whatever shipper You want, These will probably fit in a 12" x 12" x" 12 box, or maybe a 16 x 12 x12 , or even larger, without the bar; if you want the bar, the shipping gets pricey . Send me the mailing label, pay for the box and packing; and then we will box it. So local pick-up is probably best. USPS doesn't usually charge a pick-up fee, at my address,; but FedEx, and UPS does, so we don't usually use them.
I will attach some general pics in this ad but I can get more detailed pics, just tell me what you need.
We have a mix of Mall, McCulloch, Homelite, David Bradley, Remington, Sears, Lancaster, Craftsman, Western Auto
McCulloch 1-43, 200, 300?, 3.25, 35, 300R, Mall 12A, Mall Remington GP, Remington Bantam, DAVID BRADLEY ?, 360 Gear, DB ?, Homelite ?, 420A, 26LCS, 700D- R, Super EZ, EZ, XL, Lancaster L-25, Sears and Craftsman, PowerCraft, Montgomery Wards
I also have about six (6) Homelite 150's, most with cases. All were running, when we were farming, Had a 150 on each tractor and utility vehicle, for that occasional limb or tree falling into the field. Have NOS Homelite parts too w/ manuals. No pics now, at another location.
This is what I have dug out so far, if you take them all, I will take less, Look at them, email me or PM as to what you want to pay. I will respond to all emails or pm's
Email me or PM through this forum
I am located near Altoona, PA



