bar

So I went to Lowe’s and got a Oregon replacement bar/chain combo. The oiler hole didn’t line up, so I drilled a hole lower than the original Oregon one and drilled down from the channel to the new hole. The bar does get some oil now, but is that enough of a fix? Is there a bar that anyone knows...

Just picked up a CS-800p with a 2o" and 36" bar along with a few chains for $225. Ive got a 36" granberg mill that I've been using my cs-590 with a 27" bar on, but it tends to struggle. I'm still relatively new to this so I thought I'd ask the experts... First... Are there specific bars that...

Looking for large mount bar 42" 3/8 .063. So far I've bought 4 bars on eBay the people claimed were large mount that fit Stihl 070/076/084/088/ 090/ and MS880. Everyone of them has been the small slot for the smaller saws. Getting VERY frustrated. My 36" bar is too small milling and need a...

I was looking on the tradin' post this morning and noticed someone was selling a 25" and 30" .404 bar for the larger Stihl saws and there seemed to be some sparked interest and they seemed to have sold. I was wondering what a guy thinks he could get for a used Stihl bar and what ones are worth...

I have a JD CS56 that runs like a dream, is strong and very reliable, despite my novice knowledge of maintenance and lack of upkeep... Only thing ive done in the three seasons ive owned it is put a primer bulb on it and keep oil/fuel in it. Cranks on first pull and runs like a top every time...

Everything is gone. Thanks gentlemen. I have two brand new Oregon Power Match 24" bars. This is Oregon's BEST bar and features a replaceable tip. They have the D009 (large Husky) bar mounting holes. Fits just about every Husqvarna / Jonsered / Dolmar / Makita larger than 60cc. They are 24"...

I've been searching for info but coming up pretty dry so far, so I figured I'd ask. I just got an Echo CS 490 off eBay on a whim. I have a 372XT for bigger stuff and wanted a saw I could tinker with and use for odds and ends stuff. It comes with a 20" bar which is bigger than what I'm wanting...

FREE!!!! Echo CS-6700 parts saw. Things I know are wrong with it are bad piston, but cylinder is still ok. Also not getting spark. See pictures for detail, or ask questions, I'll try my best to answer. JUST pay to be shipped from 30205.

I have a 288xp I would like to use for milling. My current dilemma is rather I should just use 36" bar with it, which won't max out my 36" Alaskan. Or if the saw would be able to run a 42" bar which would allow me to use the full 36" of mill. I am worried I will be asking too much of the saw.. I...

Edit --> Moderator please delete, moved to chainsaw forum.

Just opened a new 28" husqvarna bar, and noticed the split in the end of the bar. Haven't had a bar this long before, but doesn't look normal. Emailed dealer with pics, and he said he opened all his bars that size, and they all had that, and wasn't sure why, but would email husky. Legit, or a...

I'm thinking of water jetting an artistic pattern into my chainsaw bar and am wondering if it can be done. I would choose a pattern that would minimize the loss of structural integrity, but I am also wondering if the metal in the center of a bar is solid, laminated or riveted together? Anyone...

Just bought a Oregon micro lite bar and chain, can someone shed some light and give me info on this chain and bar

•Cutting Length 32" (80cm) •Pitch .375" (3/8) •Gauge .050" (1.3mm) •Drive Link Count 105 •Nose Sprocket 11 teeth •Weight 4.9Lbs (2.2kg) $120 Brand New bought from Dealer I use .063 so no need for this 32" .050 rollomatic. I can drill holes in each end of you want this for your mill. I like...

Hi everyone Just wondering what 18" Oregon or Carlton bar in .325 pitch by .058" gauge would fit the Echo CS-501 saw. I can not find any refferences other than to some 3/8 or .050" bars. Thanks, john

Hello, Looking for a bar to fit a mac 125. Looking for something in the 36-42" range. Message me what you have and price. Thanks! Joe

My buddy is selling thes Misc Handle bars and bucking spikes, if you see something you are interested in shoot me a PM and I will get you more info.

Half rant, half questions. Neighbor and I are cutting a wind blown oak, neighbor borrows my saw and bends my 25" Rollmatic ES. Not worth getting angry over. I run by the Stihl dealer closest to work this morning & ask them how much to straighten the bar. They say it can't be done. I guess I...

I noticed they had rolled out some larger bars over the 14" bar and chain loop they introduced the brand with. I put 3 - 16" loops and a 16" bar in the cart and shipped they were a few cents less than $40 total. here is a 16" loop...

Have a few 42" bars to sell as I am consolidating bar sizes. First is a Oregon Power match 42" 3/8 pitch .063 for a large mount husky. I used it a few times on my 395xp. Comes with a chain that's in good shape. Full skip full chisel Oregon. Looking to get 100 plus shipping. Second bar is a...