dolmar

anyone out there running the dolmar/makita 5105 50cc saw? any issues with it -- hard starting? flooding or other weirdness?? anyone run this saw hard? stock of MMs are ok-- thanks--

S 11 for sale or trade,Saw has 120 pounds of compression, good spark,and will start with a prime and die.16 inch bar is in good condition and the chain has 50% left o it. I am always looking for Dolmar and Makita stuff,but open to all modern chain saw stuff.

1 as shown dolmar 119 p/h complete (TURNS OVER RUNS WHEN FUEL SPRAYED IN THE CARB ) sold as non-running ... missing bar cover 1 bar stud 2 bar nuts looking for $65 obo plus the ride......... prefer postal m/o p/m if interested

I am looking for a new chainsaw. Been cutting for a while for firewood and had the Stihl MS 260 pro which met its end. Still have the MS170 Stihl but want a second saw. Something dependable between 40 and 50 CC. People say look at the Dolmar. What suggestions do you all have? Another Stihl or a...

I have read a couple of older tabs on tuning the sweetheart Dolmar that I own, and it seems that there have been issues with not being able to get them to clearly 4 stroke. I don't own a tach, although trying to tune this saw is making me wonder if I need to break down and get one. I last ran...

Looking for a dolmar ps-421 or Makita equivalent parts saw... Specifically, I know for a fact, I need a clutch/bar cover. I might need a recoil as well. And possibly some other miscellaneous parts. Which is why I stated I'm looking for a parts saw. Parts saw might work out best? But if one is...

Looking for this saw in blue. Willing to spend $250 Or willing to trade a nice Dolmar PS-421 for one. If you prefer orange, great chance to switch! Lol. Feel free to comment or message me. Thank you.

Looking to trade this Dolmar 510 for a Dolmar 420 or 421. Or Makita equivalent EA4300F40B. Comes with a 20" bar and chain. I am looking to do this because I mainly use 40cc saws, and there is no Dolmar dealer within 2 counties of me (i even checked their website, they only list 3. I called all...

Trying to constantly have 2 saws posted for sale. One just sold, so grabbed this one to post. lol. Looking to sell this Dolmar PS-401. Bought it in its current condition. Never dug into it. Was told it has a bad piston ring, which has led to a scored piston and won't start. I never tried. Just...

I want to upgrade my 6400 and cant figure out if I should go OEM or big bore. I was dead set on OEM after reading every thread I could find. Than I realized the OEM cylinder I was looking at was the new 7910 and not the 7900 that are in the old threads. I know the 7910 is advertised as less...

dolmar 6800i,brand-new nos mahle cylinder and piston,new bearing and wristpin,brand-new nos 20inch bar and full chisel chain,this saw is all there and in nice running condition,has 150 psi on compression,does have a small piece of aluminum broke out of case near air cleaner housing but is...

im in desperate need of an exhaust gasket for dolmar 6800

Dolmar 6400 series any cylinder Husqvarna 372 series (x torq or not) any cylinder Ok to clarify I'm not talking pop up pistons and running race fuel. I'm talking what a guy with grinding/polishing tools, a timing wheel and possibly cutting the jug down to reduce squish can achieve between these...

Ok I have a few questions before purchase. 1) In some pictures I see the decomp button on the left side or the right side of the saw, what does that mean (updated, other things changed ext?) 2) Muffler that comes with a new 6400 is now always with a cat? or do some have the SLR? 3) Is this...

I currently have a Stihl 461 ported by MMWS. I love the saw! It cuts great, starts easily and is a very fun saw. Now here's where the question comes in. I have always been partial to Stihl. I know this is a very debated topic as to whether Stihl is the best or not - I like them and never had...

First off, I want to ask 2 questions: which saw/brand. AND can I use the same 20 inch chains I use on my MS 661?? I just got finished doing 3 weeks of mission clean up work after the tornadoes that hit Mississippi on Dec 23. I have a MS 661, which I Love. It cuts through anything, as long as I...

I'm pretty new here, but I've been watching the threads for a while now to try and buy a large milling saw to replace my makita 6401 with BBK that the dealer says needs new bearings now, but haven't found the right one in my price range (those 6401's can be quite the deal). I'm looking for...

Hi, I'm looking to get a 5th saw, I already have a ms880, 372xp (old school), 550xp, 028WB and ms180. Looking for a third saw just for kicks, getting it this month any suggestions, no junk (poulan etc...) not really for a specific use, probably tree felling/firewood, open to anything. Thanks! :chop:

Took the big bore Dolomitey out and finally cut a good tree with it. 28" bar. Stump is about 33". Didn't have my tape, only bar to use. Hard maple and no issue! Realized how piggish she is on fuel, but that's some wood to swing thru. Cut up tree today. First 5 blocks solid, then the old hollow...

I have an Ebay pricing question for someone who knows more than I about how these things work. My last two 600p's were bought off Ebay (recently) for $400 each and free shipping. These saws seem to show up pretty regularly at really low prices if a guy is keeping an eye out. My question is...