ms460

Stihl ms460 mag, just put a plug and carb kit into it, only down side is I had to use a chip deflector from the wide chain cover version since I couldn't find my proper sized ones in my parts. It is a used saw and I had tested it last year cutting hense why the new plug and carb kit, but sat...

Hi Folks, I'm selling my MS460. It's a (almost) complete Farmertec engine assembly with the rest being OEM. It's also waiting on a OEM piston kit (just leaved Australia). It hasn't seen any wood, just ran to set up the carb. Powerhead only Asking US$500 + postage from France Works perfectly...

My 460 is showing a bit of rust on the stock muffler. I figure if I replace it, I might as well upgrade it. I've never done anything but run fuel & oil through this saw. Totally bone stock. It is about a 12 year old saw now (I think. close enough) The mod that always pops up is "dual port...

I'm having a heck of a time trying to find the tool to install the Fly Wheel side of crankshaft. Can you just press it together with a shop press or will that bend the crank. I have the pto side tool to pull the crank into position, just can't figure out the fly wheel side. I don't want to...

Just bought a MS 460. I'm going to have a 28" bar on it. I occasionally cut some oak for my smoker and lots of folks around here seem to be scared of tackling a larger tree (even when it is on the ground). I was tired of doing it with my MS 290 so I got a slightly more big boy saw. What sort of...

I know it's a long shot, but worth a try. Since I got my 261, the 241 sits in a case. I really want a 460 or 461. My 241 has a modded muffler and less than 4-5 hours on it.

$30 shipped

Stihl MS460/461 Rescue Kit. $50 shipped in the Continental US not including anyone in the PST or International (will provide exact shipping quote.) PM if you have any questions!

I have recently taken the saw apart to see what was wrong with is and it turned out the be more than I was want to deal with it needs completely rebuilt so it is being sold as parts $40+ S&H Would trade for case gasket and or seals and bearings for a 576xp and or ms460/ms461.

Mainly looking for a Gas tank. Just let me know what you have.

I just found a REALLY nice unicorn and I have decided to sell my MS460 Magnum. All OEM & very clean as I hope you can see from the pictures. PHO w/ dual spikes, roller chain catch, decomp plug, OEM HD filter and Stihl Pre-Filter band $635 includes shipping w/ insurance via FedEx Ground...

Looking for a Stihl 70cc size chainsaw and narrowed it down to these models. I already have a 372xp but want to try out a larger Stihl (have a 026pro). Saw should be all oem. Not looking for rebuild. Doesn’t have to be a show queen but not one beat to crap. Let me know what you have. Thanks, Joe

Looking for an oem cylinder for a ms460.

Huztl has a sale going for $26 + shipping. My shipped price is $36 to Oklahoma. Wish I needed some but if you guys need them get them ordered today. Huztl sales never stay priced as long as the website states...in this case it will not be $26 for 7 more days as the site shows. Make Chips!,

Let me just start off by saying I am by no means the best at sharpening, however I am getting better ;) check it out, the top half is before and the bottom half is after. This is my Demonstration of file depth under the top of the cutter. It allows for a better bite and a less immediate...

I have a nice ms 460, I would like to order a set of spikes for it, what is common to be used, and also do they all come with the roller chain catch?

Good shape MS460, all OEM as far as I can tell. Picked it up locally a few months back and have cut with it. Fires right up and runs/oils as it should. 150 compression, has the stihl OEM dogs and covers. Muffler port has been opened a little but internal baffles etc are all there. Comes with a...

Picked up an old 046. I checked the compression and it was at 90lbs so I recently replac d the piston/rings, coil and rebuilt the carb. It started up with some starting fluid and idled but kept bogging and dying when I tried to throttle up a bit. After about 6-7 times it stopped running all...

I need a used bar 36" and chain too if you have one. If you have pretty worn one I could get cheap that would be great. Need it to cut logs up in the river now that the water is finally dropping down. Don't want a new bar for this job