stihl

Good day, I have a couple Stihl 051 parts saws (oil cap on top) that I’d like to maybe exchange for some newer 051 or 076 parts to build the popular 051/076 hybrid saw for bucking some of the bigger timber we get on the west coast😎 One of the saws is complete with full wrap handle and I did...

I bought this saw off of marketplace. (His father in law passed away and he couldn't get it running) Oil is leaking out of the spark plug hole after I've emptied fuel and bar oil. I've tried new fuel with proper ratio. If I take the spark plug out I can pull the pull cord, if I put the spark...

I may have the opportunity to bring home an 050. I don’t know much about them or what shape this saw is in. Will it be worth the adventure to get and rebuild?

hey guys! looking to purchase a new saw and ive narrowed it down to down to either a 044/046 or a 066. wanted to get some opinions. planning on using it for some medium to large firewood bucking and felling with likely starting with a 28in bar (maybe upgrading to a 32in later). weights not a big...

Stihl ms460 mag, just put a plug and carb kit into it, only down side is I had to use a chip deflector from the wide chain cover version since I couldn't find my proper sized ones in my parts. It is a used saw and I had tested it last year cutting hense why the new plug and carb kit, but sat...

Hello, I'm working on my uncles Stihl MS 271 and when I got it all torn down I found the the transfer cover had come off the head. Now my question is can I reattach this some how or do I need a whole new head for it ?? I have never seen this happen so I figured I'd ask you guys/gals who are...

Hi Guys - I'm looking for a Stihl Contra Super/Lightning Super cylinder with the 66mm bore. I have a Lightning Super project I got from a member here years ago but the plating is damaged badly. I have tons of stuff to trade including many unobtanium parts for a variety of large vintage and...

Hi all, I'm trying to diagnose this whirring/screeching sound at idle on my Stihl 088. It happens when the chain brake is both engaged and disengaged. I think it goes away as the RPMs increase, but it's hard to hear over the engine noise. The easiest way to replicate the noise is by pulling...

Iv recently picked up a stihl ms291c-beq, can't say iv heard of this particular model, I'm used to the standard ms291, can anyone tell me what that parts avaliablity is like on this saw and if the 2 versions are both parts compatable, reason I ask is the model I have has a purge button whereas...

Saw was given to me. It had been ran over or backed into not sure. Tore all the junk parts off and tossed so what you see is the rest. Would like to get $125 plus shipping to the lower 48.

I recently bought a 046 off a guy, it ran well then i tore it down to clean it up, rebuilt the carb, changed plugs hoses are okay, It never gave me a problem always started up in 4 or so pulls, Anyways i came around to adjusting the carb got it all dialed in ran it for a few minutes worked great...

Hi, I am looking to buy a professional chainsaw, I do however have some difficulty deciding because this will be my first ever pro saw. I have been looking at a Stihl ms 462c because I don’t like screwing around with carburettors but I do wanna eventually put a barkbox and some other...

Good evening everyone! First time posting on here, long time reader🤓. I recently purchased a stihl 038 magnum II off ebay for 200. Needs rebuilt basically from the ground up no big deal I repair chainsaws on the side... What I am curious about is if there is a bigger better air filter for this...

I have a Stihl 024 that I’m working on, and I’m scratching my head on tuning it. The carburetor has a new rebuild kit, and I believe the metering lever is the correct height. The initial settings are one turn out on low and high, but it wants to run at 3/4 turn out on the low side. When I turn...

hello again basically ms362c starts up and idles very well, give it WOT for a few seconds and then the saw starts stalling/dying then it picks up power again, and so on. whats been done to it: brand new from STIHL fuel filter, wire harness, solenoid replaced or cleaned parts: air filter...

Hey everyone. I just bought this used 036-cylinder off eBay. It has some odd pitting, as seen from the pictures. The ad said no scoring but didn’t mention anything about the pitting. The pictures were too far away and out of focus to see the issues. My question is, would you run it, or would you...

New in box am top ends. Mostly laser cylinder kits couple tecomec ones. Have other saw/small engine parts to go through yet 2 husqvarna 365 1 stihl 038 1 husqvarna 288 1 husqvarna 345 1 husvarna 575 1 husqvarna 268/268k 1 stihl 029/ms290(laser don't have picture atm) $80cdn+shipping located...

Hello all. Looking for a NIB 441. Well…doesn’t have to be in the box. Please let me know if you or someone you know may be looking to part with one. Thank you!

What is on the list what I have by the roll and 25% off the prices in the list + shipping if needed to ship. I do have a bunch of 404 0.63 loops mostly in semi chiesel. If interested send me a drive link count so I can go match up. Mostly oregon but some stihl loops in there. I'm in winnipeg...

I want to sell my 015L chainsaw with a 14'' bar and full chisel chain to somebody who will take care of it so that it doesn't need to be sentenced to a horrible death of getting straight gassed. If it doesn't sell here by Saturday, or I will sell it at my yard sale. runs and oils. I am selling...