011 oiling problem

[monkyboy1975]

Hi all I picked up this 011 on ebay it runs good and cuts awesome but the the bar won't oi,so i replaced said pump diaphragm and gaskets but the thing still isnt getting any oil to the bar,and yes everything is clean.

 

[beelsr]

mine's just the opposite. :hmm3grin2orange: anyways....

clogged hole on the bar? plunger bore or filter clogged? the oil tank's vent hole clogged. pump plunger could be stuck. filter could be bad. you could also have a bad hose.

Make sure you replaced the compression spring between the diaphragm and pump cover and NOT between the diaphragm and the pump housing.

i've attached the relevant pages from the tech manual...

 

[monkyboy1975]

Thanks i'm pretty sure that it's the spring when i pulled it apart it was between the pump housing and the diaphragm; some boob musta put back together wrong,so put it back together as i found it,thanks again.