032 got spark and running now !

[kidd300]

i regapped the points put everything together it was alll apart and filled it with gas and oil and a few shots of either got it running now i have to tune it and put a bar on it and chain and try this on some wood

Does either hurt if used alittle at a time


My First saw rebuild and major overhaul

Mike

 

[PES+]

Not good on a regular basis

Use premix and put a little in the plug hole. Ether washes the oil off the walls.
Doing it once should not hurt too much though.
I've seen farmers use it on a regular basis when it gets cold and the results can get pretty ugly the most wear is usually the rings.