044 vs. 064 for Processor

[rking453]

I am planning to buy a Wallenstein winch in-feed processor, to feed my outdoor wood boiler, and to sell a little bit of firewood. The processor has a pivoting chainsaw holder, I put a picture in the post showing what it looks like.

I am trying to decide which of my saws to use as the dedicated processor saw. My two bigger saws after a couple 036s are an 044 10mm slant and an 064. Whichever saw gets put on the processor will definitely get the most run time and wear. I am leaning towards 064 as it is bigger, may not wear out as fast. On the other hand I know parts are becoming an issue.

Looking for some advice and opinions.

 

[pioneerguy600]

064-066 would be my choice big enough to handle anything thrown at it and strong built high output class saw.

 

[jackdaripper]

Man, I honestly wouldn't want to run either. This might be a good job for a 660 clone

 

[lone wolf]

I am planning to buy a Wallenstein winch in-feed processor, to feed my outdoor wood boiler, and to sell a little bit of firewood. The processor has a pivoting chainsaw holder, I put a picture in the post showing what it looks like.

I am trying to decide which of my saws to use as the dedicated processor saw. My two bigger saws after a couple 036s are an 044 10mm slant and an 064. Whichever saw gets put on the processor will definitely get the most run time and wear. I am leaning towards 064 as it is bigger, may not wear out as fast. On the other hand I know parts are becoming an issue.

Looking for some advice and opinions.

View attachment 1235661

The bigger saw would be what you want.

 

[jackdaripper]

With the difficulty finding parts for 064's and 044's growing, why not save them for non-production use? Save those old saws.

 

[pioneerguy600]

Save them for what, there are plenty of these saws still available with plenty of replacement parts. These are not vintage saws that mostly have NLA parts available.

 

[jackdaripper]

Well, it's definitely getting harder to find 064 cases, covers, coils, oil pumps, etc. They are getting up there in value as well. The beauty of those old saws was their power to weight ratio and asthetics. Those things are no benefit to a processor machine. But that is just my personal logic.

 

[lone wolf]

Well, it's definitely getting harder to find 064 cases, covers, coils, oil pumps, etc. They are getting up there in value as well. The beauty of those old saws was their power to weight ratio and asthetics. Those things are no benefit to a processor machine. But that is just my personal logic.

Who cares if he's selling wood and saving money on heat with the machine, what you save you can buy any saw you want in just one season.

 

[pioneerguy600]

They are just chainsaws, just machines designed to be used, keep one if one wants to bad enough but there are hundreds if not thousands out there still running well enough to do daily duty. Not every one needs to be saved, if one gets close to worn out then rebuid it and shelf display it. Don`t tell me they are so rare that parts cannot be found for them, I have rebuilt saws from the 1950`s through the 60`s with NOS parts, maybe rare but not impossible to find.

 

[lone wolf]

They are just chainsaws, just machines designed to be used, keep one if one wants to bad enough but there are hundreds if not thousands out there still running well enough to do daily duty. Not every one needs to be saved, if one gets close to worn out then rebuid it and shelf display it. Don`t tell me they are so rare that parts cannot be found for them, I have rebuilt saws from the 1950`s through the 60`s with NOS parts, maybe rare but not impossible to find.

Not like its mint !

 

[pioneerguy600]

Not like its mint !

Unless it is a NIB then it is just a used chainsaw. If it does not have sentimental value to one then its just another chainsaw designed to cut wood, I built an 064 mostly from NOS parts and I still run it cutting larger wood sometimes with a 36" bar but more often a 32. I have three 066 saws that I don`t hesitate to cut up anything that comes my way, just used chainsaws no mint ones here.

 

[jackdaripper]

I understand where you're coming from. I definitely don't think they're exotic vintage saws by any means, but I just have a soft spot for the 064 and the 10mm 044. I agree, they are just saws at the end of the day.