Want to Buy 056 Super 54mm piston and cylinder with factory angled fins.

[Piston Honda]

I'm looking for a 056 54mm piston and cylinder. I have the dual port muffler so I need the cylinder that has the angle cut fins on the left side of the exhaust port.
I look forward to replies.

Thanks.

 

[Bill G]

I have piles of 056 parts so It might be best to post a picture of what you mean by angle cut fins

 

[Piston Honda]

I have piles of 056 parts so It might be best to post a picture of what you mean by angle cut fins

Oh cool. I have an 056 Super build/restoration im doing. Might have to do some business together.
I'll post some pics tomorrow. The fins are cut/cast just like the 056 magnum 56mm cylinder but the one I have is a 54mm.

Thanks Bill.

Piston.

 

[Piston Honda]

Are they "cut" from the factory?

 

[Piston Honda]

I'm no expert but I do believe have enough knowledge in the casting, machining, and metal fabrication world after 35 years to make an educated assumption that that cylinder strongly appears to be factory "cast" with those fins in a 45° angle and not "cut."

 

[Piston Honda]

Here's some close up to get a better account.

 

[Piston Honda]

Oh cool. I have an 056 Super build/restoration im doing. Might have to do some business together.
I'll post some pics tomorrow. The fins are cut/cast just like the 056 magnum 56mm cylinder but the one I have is a 54mm.

Thanks Bill.

Piston.

Here's some pics Bill.

 

[Piston Honda]

A few more.

 

[stihltech]

The fins are cut for clearance of the exhaust outlet.

 

[Piston Honda]

Yes. I understand that. I have a bone stock original 056 Super that came with the exhaust with the secondary port, and that is the reason I'm searching for a 54mm cylinder with the fins that are cast, from the factory, at a 45° angle. I've found several 54mm cylinders that don't have the angled fins. I've also found a few 54mm cylinders that somebody has "butcher cut" the fins at a 45° angle in an attempt to fit the dual port muffler onto, but thats not what I'm interested in.

Thanks for the reply.

Piston.

 

[Bill G]

I am still digging but the pictures help a lot

 

[Piston Honda]

I am still digging but the pictures help a lot

Awesome! Thanks Bill I super appreciate it.

Piston.