066/660 metal flywheel/coil and tank.

[kyle.kipple]

I have a coil for metal flywheels. 1122 1311

I also have two metal flywheels and I'm not sure which will work with the coil. One flywheel (11224001209c) is much wider than the other (11224001201a)

Tank assembly with trigger setup carb housing and coil switch leads.

Make offer on the coil and whichever flywheel or both

Tank I want 60+ shipping. I has tested it for leaks and found nothing.

Sent from my iPhone using Tapatalk

 

[big t double]

I believe your 1201 flywheel is actually for an 064 if it makes a difference to ya.

 

[kyle.kipple]

I believe your 1201 flywheel is actually for an 064 if it makes a difference to ya.

Would it work on either one?


Sent from my iPhone using Tapatalk

 

[big t double]

I imagine it would with the correct coil but I believe you would need the 064 recoil also since the flywheel is thinner I don't know if the 066 recoil/rotor will sit far enough in the flywheel for the starter dogs to engage it. Someone smarter than me should probly address this though. That tank looks pretty clean by the way.

 

[kyle.kipple]

I see. And hopefully someone chimes in here. I know there's a difference just don't know which matches with the two so I posted both hoping someone can school me. Thanks.


Sent from my iPhone using Tapatalk

 

[big t double]

With the 1201 flywheel on an 064 you can use the early dogleg coil (don't know part number off my head, can look when I get home if you want) or the 0000 400 1300 coil provided the correct mount boss' are tapped in the case...I hope someone chimes in to see if they can run on an 066...and I'll stop muddying up your sale thread now...sorry

 

[kyle.kipple]

Your fine I do appreciate the info. Hopefully this will help someone.


Sent from my iPhone using Tapatalk

 

[kyle.kipple]

50+ shipping on the tank.


Sent from my iPhone using Tapatalk

 

[kyle.kipple]

T


Sent from my iPhone using Tapatalk