066 aluminum flywheel and coil

[vquinoveva]

Having trouble finding a coil that will work with the old 1122-400-1209 flywheel can anyone help me out?


Sent from my iPhone using Tapatalk

 

[atpchas]

If you work on 1122 saws, you'll want to save this thread:
https://www.arboristsite.com/community/threads/064-066-ms660-18-flywheels-7-coils.282162/

 

[vquinoveva]

If you work on 1122 saws, you'll want to save this thread:
https://www.arboristsite.com/community/threads/064-066-ms660-18-flywheels-7-coils.282162/

I have read that one but when trying to source a coil I’m having a hard time finding one that I think fits the older flywheel, does anyone have a suggestion


Sent from my iPhone using Tapatalk

 

[L34]

Is it the red light coil?
Not that I have one.

 

[jltrent]

You will need a limited coil. I am not sure they make them anymore. The 1204 and 1209 flywheels will need those. I would try to find an unlimited flywheel as many coils with a 7" wire will work on that setup. If there was a way to put another key slot in those that was 100% accurate you could use what you have.

 

[pioneerguy600]

You will need a limited coil. I am not sure they make them anymore. The 1204 and 1209 flywheels will need those. I would try to find an unlimited flywheel as many coils with a 7" wire will work on that setup. If there was a way to put another key slot in those that was 100% accurate you could use what you have.

They can be re broached, its just the timing that is out on the older flywheels when used with the newer universal modules.

 

[dyager]

I might have them both. I tore down an 066 last year and think I might know where the parts are. Give me a few and I’ll start digging

 

[dyager]

Here’s what I have

 

[vquinoveva]

If you work on 1122 saws, you'll want to save this thread:
https://www.arboristsite.com/community/threads/064-066-ms660-18-flywheels-7-coils.282162/

I have read that one but when trying to source a coil I’m having a hard time finding one that I think fits the older flywheel, does anyone have a suggestion


Sent from my iPhone using Tapatalk

 

[vquinoveva]

Here’s what I haveView attachment 895993View attachment 895994View attachment 895995

Are they for sale cause I’m having a hard time finding a coil that will marry up to a 1209 flywheel


Sent from my iPhone using Tapatalk

 

[vquinoveva]

Are they for sale cause I’m having a hard time finding a coil that will marry up to a 1209 flywheel


Sent from my iPhone using Tapatalk

Correction is that the poly wheel size equivalent? The 1217


Sent from my iPhone using Tapatalk

 

[L34]

Poly wheel won't fit ally crank.
You can run the common 1300 coil with no key in wheel to get timing right.
Here I'd an 064 with common coil and no key.
This is with piston AT TDC.

 

[dyager]

It’s all I have in the 066 realm. Sorry it won’t fit your needs. There are parts out there, just gotta keep asking!

 

[vquinoveva]

Poly wheel won't fit ally crank.
You can run the common 1300 coil with no key in wheel to get timing right.
Here I'd an 064 with common coil and no key.
This is with piston AT TDC.

Would I have to resolve the key if I ran that coil on my 066?


Sent from my iPhone using Tapatalk

 

[L34]

No
Same setup for 066.