066 Coil Gap

[soazt]

I need to replace the spark plug lead on my 066. To do that I need to remove the coil. Currently the gap between the coil and the high portion of the flywheel is .020. Does this sound right? I don't have a service manual yet.

Thanks
Mike

 

[jsikkema1]

The new wire (5mm) will thread into the ignition module. To set the gap I use a business card (most are .012-.015) between the module and magnets- let the magnets suck the module to it and tighten down. Remove the card and double check clearance.

Jeff