Everything you need to go milling. 090 direct drive with nicely made Alaska mill. The GB bar has a .325 nose and the Stihl is currently equiped with a .
325 rim. The handle has been cut down down so it is now more of a half wrap. I only have one dog. What's not pictured is two .325 chains, one .375 chain for the roller nose bar, and a new in the bag clutch assy for the Stihl. In the picture you can see how the original side cover has been cut all away for chip clearance so you get a new side cover in the event you want to do some felling or bucking. The only thing I would think you would need would be the hardware to attach the handle and perhaps a longer pull rope. Maybe a new plug wire plug clip would not hurt. You'll need a .375 rim to run the roller nose bar. The saw runs like a top but I got hit by a car while walking accross a parking lot and during my rehab I lost access to all the cherry logs I was going to mill. The overall length of the roller nose bar is 53" and the GB is 46".
$550 plus freight to you.
325 rim. The handle has been cut down down so it is now more of a half wrap. I only have one dog. What's not pictured is two .325 chains, one .375 chain for the roller nose bar, and a new in the bag clutch assy for the Stihl. In the picture you can see how the original side cover has been cut all away for chip clearance so you get a new side cover in the event you want to do some felling or bucking. The only thing I would think you would need would be the hardware to attach the handle and perhaps a longer pull rope. Maybe a new plug wire plug clip would not hurt. You'll need a .375 rim to run the roller nose bar. The saw runs like a top but I got hit by a car while walking accross a parking lot and during my rehab I lost access to all the cherry logs I was going to mill. The overall length of the roller nose bar is 53" and the GB is 46".
$550 plus freight to you.