12 strand/3 strand

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Eagle1

ArboristSite Operative
Joined
Jun 1, 2003
Messages
439
Reaction score
10
Location
Cape Cod, MA
I just purchased a 5/8 3 strand bull rope. I think I made a mistake. It hockles, dosent wrap well, and has alot of it own friction.
Using a port-a wrap it almost dosent even let the limbs down. Maybe I will just use it for craning or something.
Any in-put guys?
 
Three-strand :
Under load it torques. Other than good abrasion resistance, it sucks.
 
3strand is way obsolete. I really cant think of any good uses for it except that its easy to splice and you can make a pretty decent lanyard out of it.

Kenn
 
Ya I figured it was not good in the applications I wanted to use it. It was cheap, I gave it a try.
I will use it to yank out shrubs.
 
Lanyards and friction hitches; short homemade stuff, experiments for 3 strand easy eyesplice i think.

i think it's flutes between strands dissipate some friction, handling better in some cases against braid for lanyards, or friction hitches.

i used a 3 strand tail for split tail for years, always outlasted the braided tails (1/2"); and Sherrill confirmed; i like the way it handled too. Tautline, Blake's and then crossing over to Distel/Schwab before going to cords
 
That is gonna vary like braided, the dynamic/elastic properties of 3strand nylon make it best for your truck pulling trick of loading force into the line, and getting that force plus truck pull to pull stuck truck, more so than polyester or the polyolefin/hamburger helper in the mix.

i think a 3 strand is easier/cheaper to make, but not a hardlay like we would want in dirty environment.
 
That is gonna vary like braided, the dynamic/elastic properties of 3strand nylon make it best for your truck pulling trick of loading force into the line, and getting that force plus truck pull to pull stuck truck

Hey Tree Spyder. I bet you cant say that 3 times fast:) :) :)
 
I like 3 strand for a lanyard. Easy splice and great wear resistance. Sometimes can be tricky to find a friction hitch that works well with it.

I also use it to make small light-rigging slings. It's good for that stuff, too!

love
nick
 
i think braids grip the 3 strand well; or 3 strand on braid; i think there is something to the mixing of the designs.

The easy splicing makes it nice for all kinds of smaller stuff, custom experiments (FS etc.)
 

Latest posts

Back
Top