192T Troubles help???

Arborist Forum

Help Support Arborist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

BostonBull

Addicted to ArboristSite
Joined
Mar 19, 2005
Messages
2,546
Reaction score
152
Location
North Shore MA
OK maybe I am missing something here but my 192 runs like the choke is on. If you let it warm up you have to blip the throttle up a few times to get it in the high RPM's. If you just hold the trigger in it doesnt even get close to the full RPM's and sometimes will stall out! I adjusted the carb and it ran good for 1 tankfull but now its back to its old ways again. This saw is only 2-3 months old and no more than 20 tankfulls in her! What should I try?
 
Sounds like a carb problem to me. perhaps the choke is engaging and it shouldnt be, I mean, I HAVE seen trimmers with a nonoperational choke lever before, so its not impossible.
 
It idles fine and will idle forever. It just wont get up to full RPM's onits own and doesnt have much power when there and bogs down.
 
Does the primer bulb fill with fuel? Filter in tank could be clogged but weird after 20 tanks. Try fresh fuel mix. Good luck.
 
I am going to give it a REAL good cleaning and check everything over then I will see what happens if not I will bring it to dealer!
 

Latest posts

Back
Top