The problem is:
When someone screws up bad enough to contribute to the death of a co-worker, they should be fired.
Without that level of supervision. No chance at getting better.
Fired at the least!
The problem is:
When someone screws up bad enough to contribute to the death of a co-worker, they should be fired.
Without that level of supervision. No chance at getting better.
Having been involved in investigations I understand how clear most everything is in retrospect. Prosecuting people will hinder future investigations and hamstring our ability to learn from these accidents.
Good "fast" government work on getting that kid Evaced.
The time it took them to get him off that hill is retarded. . . Everyone involved is to blame for his death. . . From the first two who under assessed the trauma, to the rest of the monkeys who made obvious miscommunications, and horrible decisions.
i agree with you. the ic should have had better control of the crews. one thing i know for damn sure the medics first on scene :taped::taped:up royaly. if they had request a ambulance for transport to nearest hospital this poor kid would still be with us this is one reason i think fire fighters should not be allowed to fall trees on a fire line. the only people on a fire that should drop trees should be highly train for that job only nothing else. i know from personal experience that firefighters can not cut trees that big. trees bigger then 24" dbh should be left to professional loggers, like Northwest Timber Fallers. fire fighting and tree felling should be kept as separate operation. i hope like hell that there is some arsez being sued for f##ing up the command structure and the murder of a fire fighter.
:censored:
This happens a lot more than you'd realize, although not often does it result in death. There is however, a lot of clusters that go on with the big fires.
Part of the problem is that 'professional' fallers aren't always up to snuff on cutting fire weakened trees. I've worked with many contract fallers who simply had no fire experience, and so they were "in the dark" so to speak when it came to getting a burning snag down safely.
Of course that doesn't apply in this situation because none of those guys had the qualifications or experience to do what they were doing.
This happens a lot more than you'd realize, although not often does it result in death. There is however, a lot of clusters that go on with the big fires.
Part of the problem is that 'professional' fallers aren't always up to snuff on cutting fire weakened trees. I've worked with many contract fallers who simply had no fire experience, and so they were "in the dark" so to speak when it came to getting a burning snag down safely.
Of course that doesn't apply in this situation because none of those guys had the qualifications or experience to do what they were doing.
Technical Assessment of Accident SiteA decision was made to fall a large ponderosa pine (36.7” at the point of the cut). Downslope from the ponderosa pine was a 54” DBH sugar pine that had an uphill lean and a large cat face on the uphill side. When cut, the ponderosa pine fell downslope toward the sugar pine. It was contact with the sugar pine, or vibration from the ponderosa hitting the ground, that caused a portion of the sugar pine, approximately 120 feet long, to break off and fall upslope, hitting FC1 resulting in severe injuries.
what is a boring back cut? I think I know but Im not sure I understand the principle.Tree 1 was a class C tree. The stump measured 36.7” in diameter at the point the cut was made.
The highest saw qualification of any of the crew members present was that of a faller B.
The undercut of Tree 1 was not cleaned sufficiently as to provide an adequate “hinge” to direct Tree 1 during the felling process.
The undercut of Tree 1 exhibits two distinct horizontal (gunning) cuts and two sloping cuts. Multiple Dutchmen that would have altered the holding wood were also present. (See photo 2)
Tree 1 fell away from its intended lay due to lean, possible limb weight, and an inadequately cleaned undercut.
Tree 1 appeared to have been a sound, green tree with no readily apparent defects that would have required it to be felled as a hazard tree.
FC1 had not completed First Aid/CPR training. First Aid/CPR training is a prerequisite for S-212 (Wildland Power Saws).
The JHA for tree felling provided by EM after the accident was not adequate for the activity of tree felling, additionally no evidence could be found to indicate the JHA had been reviewed by EM or a line supervisor. Recommendations:
Fallers must only fall trees that are within their qualification level, unless being directly supervised by a faller of appropriate qualifications.
Fallers must survey the cutting area for hazards and identify escape routes/safety zones before the felling operation can commence.
Fallers must retain control of the cutting area. (S-212 identifies the cutting area as two times the height of the tree being cut; OSHA Logging Standards 1910.266(h)(1)(iv) states: “No employee shall approach a feller closer than two tree lengths of trees being felled until the feller has acknowledged that it is safe to do so, unless the employer demonstrates that a team of employees is necessary to manually fell a particular tree.”)
Undercuts must be completely cleaned.
Techniques such as boring back cuts and quarter wedging should be considered on leaning trees
Boring Backcut: A felling method that utilizes a back cut where the chainsaw bar is inserted behind the holding wood area and the direction of cut proceeds away from the holding wood toward the back of the tree to fell. This is a particularly good method to use on leaning tress as it prevents the tree from pulling a large amount of holding wood and possibly barberchairing.
I don't see the grey area here. The work was done outside the quals of anyone on site. The tree was not a hazard, the type of cut was unsuitable for the job and was executed badly. And someone died.
If I dropped a tree the wrong way in town and killed someone I would be prosecuted and ditto if one of my employees did the same. The fact that the job those fellers were doing is high risk does not mean that they are excused from the simple human requirement of taking responsibility for their actions.
One other item I havent seen raised and that is why was there no team member with higher felling credentials on site? That seems like a glaring oversight on the part of management to assume that every hazard tree would be within the capabilities of this crew. If there is to be changes made to protocol to avoid a repeat of this tragedy then ensuring teams are always comprised of at least 1 highly qualified feller should be an obvious start.
One other item I havent seen raised and that is why was there no team member with higher felling credentials on site? That seems like a glaring oversight on the part of management to assume that every hazard tree would be within the capabilities of this crew. If there is to be changes made to protocol to avoid a repeat of this tragedy then ensuring teams are always comprised of at least 1 highly qualified feller should be an obvious start.
Furthermore, we do not know who was cutting the tree and why. There is a 33.3% percent chance that the deceased was cutting the tree or a combination of fallers.
[/COLOR]
what my basic point all along has been if personnel on a fire line have to use a saw then the must be required to be certified and registered. if the IC needs trees removed they would call out
Faller-Fighters not regular firefighters. Faller-Firefighters would be like hot shots trained to do the more dangerous hazard tree work.
I maintain that the most important change that can be made is streamlining medical protocols to be simply: Evacuate injured parties to a higher standard of care as quickly as possible. It is not for someone in the field attending to the injured to worry about which trauma center can best handle the injuries or which agency can facilitate an evacuation. The back of a rural ambulance staffed by volunteers would have been preferable to medical interventions on a dozer line 3/4 of a mile from a road.
Enter your email address to join: