2009 Indiana GTG racing results

[gink595]

Here is the results to Ericks racing portion of his GTG.

Guys feel free to fill in the saws with their times if you can remember, if not no biggie. Had a great time, the bracket racing is not listed, I couldn't find that paper. The 2 cut seemed to very difficult, many tried many failed Damn rubber bands

Erick's 2009 GTG RACING RESULTS

Rev.1

9X9 basswood
0-45cc
1) Stephen 3.94
2)Jacob (ericjeepers son) 4.57
3) Erick 6.81

46-55cc
1) Frank (gink) 1.94 5100
2) Gink 2.0 5100
3) Gink 2.03 5100
4) Gink 2.07 5100
5) Brad 2.12 346
6) Ericjeeper 2.12 346
7) Brad 2.16 026/260??
8) Ericjeeper 2.22 346
9) EJ 2.31 346
10) 2.87 346

56-65cc

1) Levi 1.66 361
2) Levi 1.69 361
3) Ericjeeper 1.78 (saw???)
4) Levi 1.84 361
5) Blsnelling1.97 (saw???)
6) Nik (fatguy) 2.09 (saw???)
7) Brad 2.12 (saw???)
8) Nik 2.16 (saw???)
9) Mike Super3 2.16 262
10) Brad 2.19 (saw???)
11) Andyshine 2.29 (saw???)
12) Nik 2.31 (saw???)
13) Nik 2.47 (saw???)
14) Andy 2.58 (saw???)
15) Mike Super3 2.72 262
16) Jeeper 2.81 (saw???)
17) Tri955 3.06 2153
18) Andy 3.07 (saw???)
19) tri955 3.10 2153
20) Supercabs 3.40 (saw???)


66-75cc

1) Andyshine 1.50 372
2) Andy 1.56
3) Brad 1.91 (saw???)
4) Brad 1.97 (saw???)
5) Owen 3.22 441
6) Banshee 3.47 (saw???)
7) Stephen 3.29 (saw???)
8) Banshee 3.47 (saw???)


76-85cc 9x9
1) Andy 1.47 7900
2) Andy 1.47 7900
3) Brad 1.53
4) Brad 1.62
5) Brad 1.78
6) Brad 2.00
7) Tri955 2.34
8) Tri955 2.37
9) Tri955 2.46
10) Tri955 2.50
11) Stephan 2.66
12) Stephen 2.97
13) Stephen 3.12
14) Gregg 3.33



86-95cc 10x10

1) Levi 1.68 660 piped
2)levi 1.78 660
3) Levi 1.78 660
4) Erick 1.87 (saw???)
5) Brad 2.24 (saw???)
6) brad 2.35 (saw???)

96-105cc 10x10

1) Brad 1.88 066 BB
2) Brad 1.93 066BB
3) Banshee 3.15 (saw???)


106+ 10x10

1) Brad 1.40 084
2) Brad 1.47 084
3) Erick 3.35 (saw???)
4) Scott 3.21 880
5) Frank 3.60 880

 

[blsnelling]

My 45-55cc saw was a MS260.

My 56-65cc saw was a 361BB. Levis 361 was piped. What saw did EricJeepers run?

My only 66-75cc saw was the 372BB.

My 76-85cc saw were a MS440/460, #3 and #4 and a MS460, #5 and $6.

My 86-95cc saw was a 390XPG.

 

[epicklein22]

Man, kinda wish I had bought that 5100 when I had the chance Gink! Good to see it was running well.

 

[blsnelling]

Man, kinda wish I had bought that 5100 when I had the chance Gink! Good to see it was running well.

She was smokin' indeed!

 

[gink595]

My 45-55cc saw was a MS260.

You did run your 346 also??? No???

My 56-65cc saw was a 361BB (65cc). Levis 361 was piped. What saw did EricJeepers run?

I'm not sure, maybe Levi's piped 361??

My only 66-75cc saw was the 372BB (75cc).

My 76-85cc saw, for which the times aren't listed, where a 440/460 (76cc) and a 460 (76cc). I'm wondering if you have them in the 66-75 class since they were only 1cc off.

My 86-95cc saw was a 390XPG (88cc).

I fixed the times, somehow I combined teh 66-75 class and the 76-85cc class, thanks for pointing it out Tri955

 

[gink595]

Man, kinda wish I had bought that 5100 when I had the chance Gink! Good to see it was running well.

I wish I could have 3 more like it

 

[gink595]

She was smokin' indeed!

Not to bad was it, especially being a 5100 that isn't supposed to mod well and has a limited coil. Did you run the same 260 that beat it before with the 044 carb?

 

[blsnelling]

You did run your 346 also??? No???

Yes. It was faster than my 346, by a couple hundreths.

Did you run the same 260 that beat it before with the 044 carb?

Same saw. I noticed the RPMs are down 1000 RPMs at WOT from 17,400 to 16,400. I'm wondering if it's due for rings. Of course I'm looking for a reason I'm sure >17K RPMs is not easy on it.

 

[TRI955]

My 56-65cc saw was a 262xp and the 66-75cc saw was the Makita 8401....didn't race the 2153....yet.


Mike

 

[Erick]

Here is the results to Ericks racing portion of his GTG.

Guys feel free to fill in the saws with their times if you can remember, if not no biggie. Had a great time, the bracket racing is not listed, I couldn't find that paper. The 2 cut seemed to very difficult, many tried many failed Damn rubber bands

Erick's 2009 GTG RACING RESULTS

Rev.1

86-95cc 10x10

1) Levi 1.68 660 piped
2)levi 1.78 660
3) Levi 1.78 660
4) Erick 1.87 064
5) Brad 2.24 (saw???)
6) brad 2.35 (saw???)

96-105cc 10x10

1) Brad 1.88 066 BB
2) Brad 1.93 066BB
3) Banshee 3.15 (saw???)


106+ 10x10

1) Brad 1.40 084
2) Brad 1.47 084
3) Scott 3.21 880
4) Erick 3.35 084
5) Frank 3.60 880

You had Scott listed in fourth with a faster time than me.

 

[gink595]

Yes. It was faster than my 346, by a couple hundreths.


Same saw. I noticed the RPMs are down 1000 RPMs at WOT from 17,400 to 16,400. I'm wondering if it's due for rings. Of course I'm looking for a reason I'm sure >17K RPMs is not easy on it.

I would just be happy to be able to measure max RPM, damn limiters. I haven't touched the carb since I bought it.

 

[gink595]

You had Scott listed in fourth with a faster time than me.

Well yes I'm sure there is a few of those, I was doing it at work and I keep getting destracted with work related stuff, I wish they could see I was busy, and I don't have time for questions about buildings

 

[blsnelling]

How's this look

Erick's 2009 GTG RACING RESULTS

Rev.1.2

9X9 basswood
0-45cc
1) Stephen 3.94 023 piped
2)Jacob (ericjeepers son) 4.57 Ryobi 10532
3) Erick 6.81 3800??

46-55cc
1) Frank (gink) 1.94 5100
2) Gink 2.0 5100
3) Gink 2.03 5100
4) Gink 2.07 5100
5) Brad 2.12 346
6) Ericjeeper 2.12 346
7) Brad 2.16 260
8) Ericjeeper 2.22 346
9) EJ 2.31 346
10) 2.87 346

56-65cc

1) Levi 1.66 361 piped
2) Levi 1.69 361 piped
3) Ericjeeper 1.78 359
4) Levi 1.84 361 piped
5) Blsnelling1.97 361BB
6) Nik (fatguy) 2.09 361
7) Brad 2.12 361BB
8) Nik 2.16 361
9) Mike Super3 2.16 262
10) Brad 2.19 361BB
11) Andyshine 2.29 (saw???)
12) Nik 2.31 361
13) Nik 2.47 361
14) Andy 2.58 (saw???)
15) Mike Super3 2.72 262
16) Jeeper 2.81 (saw???)
17) Tri955 3.06 262
18) Andy 3.07 MS362??
19) tri955 3.10 262
20) Supercabs 3.40 (saw???)


66-75cc

1) Andyshine 1.50 372
2) Andy 1.56
3) Brad 1.91 372BB
4) Brad 1.97 372BB
5) Owen 3.22 441
6) Banshee 3.47 (saw???)
7) Stephen 3.29 (saw???)
8) Banshee 3.47 (saw???)


76-85cc 9x9
1) Andy 1.47 7900
2) Andy 1.47 7900
3) Brad 1.53 440
4) Brad 1.62 440
5) Brad 1.78 460
6) Brad 2.00 460
7) Tri955 2.34
8) Tri955 2.37
9) Tri955 2.46
10) Tri955 2.50
11) Stephan 2.66
12) Stephen 2.97
13) Stephen 3.12
14) Gregg 3.33



86-95cc 10x10

1) Levi 1.68 660 piped
2)levi 1.78 660 piped
3) Levi 1.78 660 piped
4) Erick 1.87 (saw???)
5) Brad 2.24 390XPG
6) brad 2.35 390XPG

96-105cc 10x10

1) Brad 1.88 066 BB
2) Brad 1.93 066BB
3) Banshee 3.15 2100


106+ 10x10

1) Brad 1.40 084
2) Brad 1.47 084
3) Scott 3.21 880
4) Erick 3.35 084
5) Frank 3.60 880[/QUOTE]

 

[TRI955]

Revised again.....

Erick's 2009 GTG RACING RESULTS

Rev.1.2

9X9 basswood
0-45cc
1) Stephen 3.94 023 piped
2)Jacob (ericjeepers son) 4.57 Ryobi 10532
3) Erick 6.81 3800??

46-55cc
1) Frank (gink) 1.94 5100
2) Gink 2.0 5100
3) Gink 2.03 5100
4) Gink 2.07 5100
5) Brad 2.12 346
6) Ericjeeper 2.12 346
7) Brad 2.16 260
8) Ericjeeper 2.22 346
9) EJ 2.31 346
10) 2.87 346

56-65cc

1) Levi 1.66 361 piped
2) Levi 1.69 361 piped
3) Ericjeeper 1.78 359
4) Levi 1.84 361 piped
5) Blsnelling1.97 361BB
6) Nik (fatguy) 2.09 361
7) Brad 2.12 361BB
8) Nik 2.16 361
9) Mike Super3 2.16 262
10) Brad 2.19 361BB
11) Andyshine 2.29 (saw???)
12) Nik 2.31 361
13) Nik 2.47 361
14) Andy 2.58 (saw???)
15) Mike Super3 2.72 262
16) Jeeper 2.81 (saw???)
17) Tri955 3.06 262xp
18) Andy 3.07 MS362
19) tri955 3.10 262xp
20) Supercabs 3.40 (saw???)


66-75cc

1) Andyshine 1.50 372
2) Andy 1.56
3) Brad 1.91 372BB
4) Brad 1.97 372BB
5) Owen 3.22 441
6) Banshee 3.47 272xp
7) Stephen 3.29 (saw???)
8) Banshee 3.47 372xp


76-85cc 9x9
1) Andy 1.47 7900
2) Andy 1.47 7900
3) Brad 1.53 440
4) Brad 1.62 440
5) Brad 1.78 460
6) Brad 2.00 460
7) Tri955 2.34 6401BB
8) Tri955 2.37 6401BB
9) Tri955 2.46 6401BB
10) Tri955 2.50 6401BB
11) Stephan 2.66
12) Stephen 2.97
13) Stephen 3.12
14) Gregg 3.33



86-95cc 10x10

1) Levi 1.68 660 piped
2)levi 1.78 660 piped
3) Levi 1.78 660 piped
4) Erick 1.87 (saw???)
5) Brad 2.24 390XPG
6) brad 2.35 390XPG

96-105cc 10x10

1) Brad 1.88 066 BB
2) Brad 1.93 066BB
3) Banshee 3.15 2100


106+ 10x10

1) Brad 1.40 084
2) Brad 1.47 084
3) Scott 3.21 880
4) Erick 3.35 084
5) Frank 3.60 880


Mike

 

[Banshee]

I ran my 372xp first and my 272xp second in the 66-75cc. My 372xp was a big disappointment for sure. It was running rich though.

 

[troutfisher]

any videos?

 

[TRI955]

I ran my 372xp first and my 272xp second in the 66-75cc. My 372xp was a big disappointment for sure. It was running rich though.

Fixed....

 

[blsnelling]

Stephen ran a piped 385XP in the 76-85cc class.

 

[blsnelling]

any videos?

We kept the ladies busy running stop watches and recording times. They're the ones that got most of all the other videos.

 

[gink595]

We kept the ladies busy running stop watches and recording times. They're the ones that got most of all the other videos.

Hey now, I kept track of some of the times as well, what are you saying