Sold 2021 MS261

[miller755]

See photos,
Build date May 2021
Aftermarket Clutch Cover, and rim sprocket. No bumper spike, not sure if i can find one for it, will look if you ask..

Cracked Top cover
Compression 175
Starts Runs idles fine etc. I have not cut wood with it.

See additional details in ad #4

$325 + Shipping

 

[tla100]

Pm sent

 

[tla100]

I bought saw, shipped pretty quick. Packed well, everything as described. Thanks, would recommend and buy from again.

 

[miller755]

I do appreciate it and am glad you are satisfied!

 

[singinwoodwackr]

I bought of these for a local firewood guy I help out.
Sent this via pm:
got the saws that day. #4 needed some cleaning and had some surface rusted clutch and brake parts which cleaned up fine. Good compression at 165, but may need rings next year..all good.
#3 was a lot cleaner. Somebody had done some work on this saw, probably base gasket elimination and rings as the comp was 185…more than stock
i put dogs and chain catchers on both and cleaned the air filters. All easy stuff. I also modified the mufflers.
both have excellent looking piston/cyl…no signs of problems.
fired right up once gassed.
very happy with purchase. Owner will get these into the forest and working on Tuesday after the storm on Monday.

thanks again.

 

[furb]

Not to hijack but where did you find the aftermarket clutch cover?

 

[singinwoodwackr]

Not to hijack but where did you find the aftermarket clutch cover?

Good question. They are just like oe from what I can tell. Not cheap plastic.

 

[tla100]

they are famertech...not sure I like the "captured " bar nuts, but will see. I got a 20" 3/8 bar and good stihl chain, waiting on 3/8 sprocket.

How did you mod the muffler? just enlarge the openeing? I have seen some guys cut fish gills in the other side and flare them out a bit.

 

[singinwoodwackr]

they are famertech...not sure I like the "captured " bar nuts, but will see. I got a 20" 3/8 bar and good stihl chain, waiting on 3/8 sprocket.

How did you mod the muffler? just enlarge the openeing? I have seen some guys cut fish gills in the other side and flare them out a bit.

I’ve done them a couple differ ways but now just open the thing up to about 3/4 of the exhaust port dimension and add a 1mm screen.

I’ll try to find some pics…
all done with a Dremel and carbide burrs.

I delivered the two I got today. Owner really likes the captured nut covers opposed to the older version saws he has. Hopefully his guys won’t run these over

I have 4 more of the mufflers to do so will get some good pics of the process.