Hello all, I have a Husqvarna 2100xp with the above bar and chain on it. Wanting to get another chain for backup that is full skip full chisel chain. Anyone know the drive link count please? Thank you in advance.
36 inch oregon .404 .063 gauge full chisel skip chain drive link count
- Thread starter smcowboy1974
- Start date
Help Support Arborist Forum:
It would be the same as any other large mount Husky DL count (and Stihl for that matter). 104DL is what I find.
Also, sounds like you have the original chain to count the links.
104Dl is what I concluded too. Thank you.
PJwoodcutter
ArboristSite Lurker
Most bars have that info stamped on them. 104dl is what I have seen too.
It has 115dl for 3/8 stamped on bar but I have .404 .063
Or rather you have a bar that was originally made and marked as a 3/8 bar with fitted 3/8 sprocket nose tip- somewhere in its life the nose tip was swapped out from 3/8 to .404 and arrived with you with a .404 chain, a chain you could have marked one drive link off, used it as #1 and counted the rest.
Yes the sprocket nose has .404 on it, but .063 on the bottom side of the bar, stamped.
