372 Unlimited Coils From Bailey's

[komatsuvarna]

Sounds about right. I think there is a gap,,,as long as its between those numbers its good. .3mm would be .012 thousandths.

 

[MCW]

Always stay with oem. I would never adulterate a saws integrity with aftermarket parts. Cheers.

Why not? Most OEM saws are coming with "aftermarket" Chinese parts already on them. Some aftermarket P&C kits are even better quality than OEM - take the newer MS660's for example.

 

[Blowncrewcab]

Seems to me the one you got is for a smaller flywheel, the curve of those pick-ups doesn't match the curve of your flywheel. Gregg will fix it I'm sure..

 

[Simonizer]

Weren't you having "custom" pistons made for your 372 build-ups? Wouldn't that be considered an aftermarket part?

The piston is made by Mahle. OEM, just different part number.

 

[duane9835]

Seems to me the one you got is for a smaller flywheel, the curve of those pick-ups doesn't match the curve of your flywheel. Gregg will fix it I'm sure..

That's my thoughts to! Looks like the wrong radius on the coil?

 

[Grande Dog]

Howdy,
No problem replacing, or refunding you on that module. Either let me know, or give us a call. I checked and our return rate on this module for all reasons is well under 1%. That price of $99.99 on the OEM module is wrong. It should be $81.87. As soon as they can figure out how it got to $99.99, we'll get it back to the right price.
Regards
Gregg

 

[GA_Boy]

Thanks Gregg. i just called CS today and got an RMA#. I'll order the oem version once the refund goes through. (hopefully the price will be fixed by then)

 

[Anthony_Va.]

So which part numbers will fit a 372xpw? Non limit coils that is.

 

[komatsuvarna]

So which part numbers will fit a 372xpw? Non limit coils that is.

OEM is 544 04 71 01.

 

[Anthony_Va.]

Will the 537 16 21 01 fit too? I think it's the one for 345-359. I found a good deal on that one. I read some that says they'll work on 372 also but I'm not sure.

Thanks Durand. I need to find one so I can get this muffler opened up a little.

 

[komatsuvarna]

Will the 537 16 21 01 fit too? I think it's the one for 345-359. I found a good deal on that one. I read some that says they'll work on 372 also but I'm not sure.

Thanks Durand. I need to find one so I can get this muffler opened up a little.

Im not sure if it will or not, I do know there is others that will fit though.

 

[mdavlee]

You don't need no black coil for a muffler mod.

I usually buy them from cogar99 on ebay when they have one listed for about $25 or so. I got one bad one out of 6 used ones I bought and never paid over $30 for them.

 

[Jacob J.]

You don't need no black coil for a muffler mod.

I usually buy them from cogar99 on ebay when they have one listed for about $25 or so. I got one bad one out of 6 used ones I bought and never paid over $30 for them.

I've bought several from Wes as well and have had good luck with his parts.

 

[Anthony_Va.]

You don't need no black coil for a muffler mod.

I usually buy them from cogar99 on ebay when they have one listed for about $25 or so. I got one bad one out of 6 used ones I bought and never paid over $30 for them.

I seen that said before. Just wondering how you tune it if it needs to be leaned out over 13,3?

 

[Trent Curtis]

Yeah, thats not good. Is there not a little rooo too p